IA All 1967, Early 1968 Lock Set

[LockDoc]

-
This is a nice OEM matched lock set for the 1967 and “some” early ‘68 Chevy & GMC trucks. It includes one complete used ignition switch with an original spacer and new bezel, two door lock cylinders, and one ignition lock cylinder, all keyed to the same keys. All locks are new OEM, not reproduction and are not made overseas. It comes with 2 brass replacement, original style octagon head keys and 2 rectangular head GM keys with the code knockouts. Also includes 2 new door lock gaskets and pawl retaining clips. The ignition switch is the correct one for all ‘67’s and early ‘68’s with no accessory position. $65.25 shipped.

Full refund minus shipping one way if not satisfied....

Per board rules post in thread before sending any PM's. PayPal or Money Order works for me.

Thanks,
LockDoc

[Rods]

I will take this.....pending picture of plug side of ignition.

[LockDoc]

-
Switch rear terminals.

LockDoc

[67ChevyRedneck]

Leon, I'll take it if Rods passes.

[LockDoc]

Originally Posted by 67ChevyRedneck

Leon, I'll take it if Rods passes.

10:55 tonight will be 24 hours since I posted the last picture. We will see if he logs back on.

Thanks,
LockDoc

[Rods]

Thanks for the picture. Looks great, I will take it........

[LockDoc]

Originally Posted by Rods

Thanks for the picture. Looks great, I will take it........

PM sent.

Thanks,
LockDoc

[LockDoc]

Originally Posted by 67ChevyRedneck

Leon, I'll take it if Rods passes.

I do have one more identical set if you are interested. Everything is exactly the same as the one Rods purchased.

LockDoc

[countr]

In line for a set, Thanks Russ

[LockDoc]

Originally Posted by countr

In line for a set, Thanks Russ

I will let you know what happens with this second set. This is the last set I have.....

LockDoc

[67ChevyRedneck]

I apologize that I forgot to check this thread today, I took the day off work to hang a new French door on the house to beat the cold and rain, ended up having to do some unexpected rot repair too... :angry:

I'll take the second set.

[C10_ustacould]

I'd like to get in line (behind countr I believe) if you put together another set for a '67.

[darkhorse970]

I’d like to send you my current set to have them keyed alike, if you are willing to do that. How much to match my ignition and door lock keys?

[LockDoc]

Originally Posted by C10_ustacould

I'd like to get in line (behind countr I believe) if you put together another set for a '67.

Noted.....

Originally Posted by darkhorse970

I’d like to send you my current set to have them keyed alike, if you are willing to do that. How much to match my ignition and door lock keys?

There are a couple of factors that enter into keying them the same and the final cost.

1. Whether or not you have a key for any of the locks.
2. If the key you have physically fits into all of the lock cylinders.
3. Condition of the cylinders.

Re-keying the cylinders usually runs $12.50 per cylinder + postage back to you unless they are really junked up inside.

If you have a key for the ignition cylinder and it works good you would only have to send me the key and the door locks.

Thanks,
LockDoc

[cheyenne shortstep]

So if I send you a key to an ignition I have and 2 door locks you'll match them for about $25?

[LockDoc]

Originally Posted by cheyenne shortstep

So if I send you a key to an ignition I have and 2 door locks you'll match them for about $25?

Yes, plus postage back to you. Make sure the ignition key fits into the door locks.

The cheapest way to mail them is USPS First Class Mail in a small padded envelope. Be sure to wrap the locks in some newspaper first.

LockDoc

[cheyenne shortstep]

Ok thank you. I will send them next week.

[Elliot949]

I am guessing both sets are gone but if not I will take a set... These are good for the early 67 correct Leon?