Blasting and rear axle stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironangel** · 12-02-2017, 06:58 AM

I use these vents on the Turbo 350, they just push in. On the axle housing I run a piece of 1/4" fuel line about 2' foot long from the barb on the axle to the vent and zip tie the vent and line to a cross member in the frame.

https://www.ebay.com/itm/4-PACK-GM-T...!US!-1&vxp=mtr

**71CHEVYSHORTBED402** · 12-02-2017, 01:50 PM

Quote:

Originally Posted by Ironangel

I use these vents on the Turbo 350, they just push in. On the axle housing I run a piece of 1/4" fuel line about 2' foot long from the barb on the axle to the vent and zip tie the vent and line to a cross member in the frame.

https://www.ebay.com/itm/4-PACK-GM-T...!US!-1&vxp=mtr

Thanks Michael. My axle had the same set-up, only a P clamp for the frame.

12-02-2017, 06:58 AM	#1
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Blasting and rear axle stuff I use these vents on the Turbo 350, they just push in. On the axle housing I run a piece of 1/4" fuel line about 2' foot long from the barb on the axle to the vent and zip tie the vent and line to a cross member in the frame. https://www.ebay.com/itm/4-PACK-GM-T...!US!-1&vxp=mtr __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.