|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-08-2017, 11:20 AM
|
#1 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
67 C30 front drum removal?
Any of you guys had the front drum brakes apart on one of the things? I can’t even get past the dust cap. I have had people tell me that it screws on and some people tell me that it is presses on. Who knows the truth?
|
|
|
|
12-08-2017, 11:32 AM
|
#2 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: 67 C30 front drum removal?
Take a large flat screw driver and put it at the lip of the cap and the hub. Tap the screwdriver with a hammer until it slips behind the lip on the cap. Then you can gently pry it out the rest of the way. The cap might bend a little but they are easily straightened back out. The dust caps aren't anything special as far as I know. Never seen a "screw on" style dust cap on any 67-72 truck.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
|
12-08-2017, 11:49 AM
|
#3 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
Re: 67 C30 front drum removal?
They don’t have lips on them like on a c10, they have almost a hex look to them.
|
|
|
|
|
12-08-2017, 11:52 AM
|
#4 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
Re: 67 C30 front drum removal?
|
|
|
|
|
12-08-2017, 11:54 AM
|
#5 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
Re: 67 C30 front drum removal?
8 sided |
|
|
|
|
12-08-2017, 07:46 PM
|
#6 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
Re: 67 C30 front drum removal?
Somebody in ole internetville has to know about this...
|
|
|
|
|
12-08-2017, 08:18 PM
|
#7 |
|
Registered User
Join Date: Jul 2014
Location: South East Ohio
Posts: 644
|
Re: 67 C30 front drum removal?
I've taken them apart but it's been a long time ago. I think if the dust cover screwed on, I'd remember that. Rockauto shows them as slip fit. If they are,
take the wheel off and look for a hole in the side of that center hub. Put a screwdriver through the hole and tap it with a hammer while prying on the cap. It'll come off. Getting that drum off might be a different story if it hasn't been removed in a while. Last edited by Richard2112; 12-09-2017 at 11:12 AM. |
|
|
|
|
12-09-2017, 09:16 AM
|
#8 |
|
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,456
|
Re: 67 C30 front drum removal?
My 1942 1.5 ton had screw type like that, never seen it on the later though.
Don't loose them, they are hard to find. This type of pipe wrench always worked well for me. |
|
|
|
|
12-09-2017, 10:18 AM
|
#9 |
|
Registered User
Join Date: Dec 2016
Location: NEW PALTZ
Posts: 105
|
Re: 67 C30 front drum removal?
Good morning. Assuming you're still looking for info on front drum removal...
On my '67 GMC C3500, the front drums simply pulled off of the front hub. The hub alone, is what's held onto the spindle via the wheel bearing nut behind the dust cap. (my dust cap popped off like seen on normal RWD vehicles) Here's a photo where if you look closely you can see the drum and hub are two separate parts. |
|
|
|
|
12-09-2017, 10:57 AM
|
#10 |
|
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,456
|
Re: 67 C30 front drum removal?
He doesn't have the type you have grumptruck, his is Budd type wheels. The hex shape head is there for a reason, to be unscrewed.
|
|
|
|
|
12-09-2017, 11:30 AM
|
#11 |
|
Registered User
Join Date: Dec 2016
Location: NEW PALTZ
Posts: 105
|
Re: 67 C30 front drum removal?
Oh, now I see the picture he posted. Had to reload the page. My mistake then. I apologize for my premature response. I hate when that happens.
|
|
|
|
|
12-10-2017, 12:23 PM
|
#12 |
|
Registered User
Join Date: Aug 2014
Location: Tuscaloosa Alabama
Posts: 8
|
Re: 67 C30 front drum removal?
Now I do in fact have an update. The dust cap unscrews. Now let the front brake festivities begin!
Last edited by Skywalker22; 12-12-2017 at 08:06 AM. Reason: forgot |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
