1972 Build thread.

[hemi43]

Originally Posted by Spf79

Front shocks in place, and the stabalizer mocked up. Not putting it on until it goes in for alignment.

There's not much that can be adjusted. I just do my own because the caster and camber is built into the front axle. Only the toe needs to be adjusted and this is easily done with a tape measure. I'm running around 3/16" toe with 33" tires.
FWIW, I did make tapered shims as I've mentioned on a few posts to give me a bit more caster. Stock is around 3 degrees, but I increased this to around 6 1/2 degrees. This made the truck much more stable, and the steering centers itself much better after doing a turn.