1982 C 10 outer wheel bearing race removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

realvc · 12-14-2017, 06:27 PM

The rotors are DONE and back on the spindles.

I ground a notch in a steel rod and was able to knock the races out.

This is the first time I've replaced bearings in a disc rotor. Now that I have THE TOOL it will probably lay in my tool box and not be used again. But it is always better to have a tool and not need than it is to need a tool and not have it.

Thanks to all of you that tried to help. Knowing that others are out there that will offer help is always a good thing.
Thanks again.

12-14-2017, 06:27 PM	#13
realvc Registered User Join Date: Sep 2013 Location: Lake Norrell, Arkansas Posts: 415	Re: 1982 C 10 outer wheel bearing race removal The rotors are DONE and back on the spindles. I ground a notch in a steel rod and was able to knock the races out. This is the first time I've replaced bearings in a disc rotor. Now that I have THE TOOL it will probably lay in my tool box and not be used again. But it is always better to have a tool and not need than it is to need a tool and not have it. Thanks to all of you that tried to help. Knowing that others are out there that will offer help is always a good thing. Thanks again. __________________ Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.