67-72 frame compatibility? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 04-21-2004, 02:21 PM

Just how compatible are the 67-72 SWB frames?

I am considering shopping for a rolling SWB frame to rebuild my '67 stepside. I have read they are compatibile but need to know if it is pretty much a direct swap or what may be involved.

Thanks

**CPNE** · 04-21-2004, 02:29 PM

If you are talking body/drivetrain swap any year leaf or coil will work. If you're wanting to swap over rear end suspension components for some reason, it's best to stick with a frame with the same rear suspension as you currently have. Though not impossible, it's more work to change a leaf to a coil or vice versa.

I'm swapping a 67 SWB chevy coil truck onto a 72 GMC SWB leaf frame and it's a slam dunk, but I'm not planning on making my leaf frame into a coil one

Joe67 · 04-21-2004, 02:50 PM

I'm interested in keeping a coil setup. The rear of my truck is perfect, front is a little pretzel like

Thanks for the info

Tx Firefighter · 04-21-2004, 03:45 PM

The 67 frames had a very slight difference in the front around the steering box area. If it was ever a problem, there are several posts on here about how to dimple one slightly for power steering off a post 68 truck.

**CPNE** · 04-21-2004, 04:01 PM

Quote:

Originally posted by Tx Firefighter
The 67 frames had a very slight difference in the front around the steering box area. If it was ever a problem, there are several posts on here about how to dimple one slightly for power steering off a post 68 truck.

Good point. I had thought to add that but since it's already a 67 I thought it moot. Ideal situation would be a 71/72 rolling coil chassis --> you'd get disk brakes, 5 lug wheels, and dimpled frame

Longhorn Man · 04-22-2004, 12:04 AM

Another thing with the 67 frames, they are not ready for a big block. On the passenger side fraim rail, there is a small section that turns up....just behinde the lower rad hose on the unside upper portion if the frame rail. I think this is big block fuel pump room, but it isn't on the 67's though.
So we'll say 68 - 72 is all the same. 67 is darn close.

Warbones · 04-22-2004, 01:36 AM

Another thing I learned about my 67. This board and the people are awesome.

Joe67 · 04-22-2004, 07:50 AM

Agreed Warbones, this site is priceless

Thanks for the helpful replies, looks like a 71/72 may be the best way to go.

When bolting up a '67 front clip, cab and bed, is there much fabrication required?

Tx Firefighter · 04-22-2004, 08:21 AM

No fabrication at all to change sheetmetal.

Longhorn Man · 04-22-2004, 09:25 PM

Well, being that you are in detroit, you may need to fab up spots where there used to be metal.

04-21-2004, 02:21 PM	#1
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	67-72 frame compatibility? Just how compatible are the 67-72 SWB frames? I am considering shopping for a rolling SWB frame to rebuild my '67 stepside. I have read they are compatibile but need to know if it is pretty much a direct swap or what may be involved. Thanks __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-21-2004, 02:29 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	If you are talking body/drivetrain swap any year leaf or coil will work. If you're wanting to swap over rear end suspension components for some reason, it's best to stick with a frame with the same rear suspension as you currently have. Though not impossible, it's more work to change a leaf to a coil or vice versa. I'm swapping a 67 SWB chevy coil truck onto a 72 GMC SWB leaf frame and it's a slam dunk, but I'm not planning on making my leaf frame into a coil one __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-21-2004, 02:50 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	I'm interested in keeping a coil setup. The rear of my truck is perfect, front is a little pretzel like Thanks for the info __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-21-2004, 03:45 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The 67 frames had a very slight difference in the front around the steering box area. If it was ever a problem, there are several posts on here about how to dimple one slightly for power steering off a post 68 truck. __________________ I'm on the Instagram- @Gearhead_Kevin

04-22-2004, 01:36 AM	#7
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	Another thing I learned about my 67. This board and the people are awesome. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

04-22-2004, 12:04 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Another thing with the 67 frames, they are not ready for a big block. On the passenger side fraim rail, there is a small section that turns up....just behinde the lower rad hose on the unside upper portion if the frame rail. I think this is big block fuel pump room, but it isn't on the 67's though. So we'll say 68 - 72 is all the same. 67 is darn close.

04-22-2004, 07:50 AM	#8
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Agreed Warbones, this site is priceless Thanks for the helpful replies, looks like a 71/72 may be the best way to go. When bolting up a '67 front clip, cab and bed, is there much fabrication required? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-22-2004, 08:21 AM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	No fabrication at all to change sheetmetal. __________________ I'm on the Instagram- @Gearhead_Kevin

04-22-2004, 09:25 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Well, being that you are in detroit, you may need to fab up spots where there used to be metal.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.