Relocate gas tank

[kamkam1]

Devil pup, will that tank work on a coil spring truck? I measured my frame today and it’s not wide enough or long enough. The tank measurements are 29”x29”x 11, according to the specs on the tank from amazon. Thanks Kirk

[Holzy]

Used a tank set up from LMC with side fill. Going to run it to my bumper and have the licence plate flip down and expose the filler. I have the original step bumper so should be somewhat easy.

[Devil Pup]

Originally Posted by kamkam1

Devil pup, will that tank work on a coil spring truck? I measured my frame today and it’s not wide enough or long enough. The tank measurements are 29”x29”x 11, according to the specs on the tank from amazon. Thanks Kirk

Best of my knowledge the frames are the same. You can bolt leafs onto a coil frame and vise versus if I recall correctly. I had to remove the spare tire carrier bracket as well as move the rear cross member back in order for it to fit. the width I didn't have to change. How wide is your frame opening from side to side?