TN 2 New Magnaflow 2.5" Stainless Steel Tailpipes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 12-30-2017, 03:46 PM

I have two new, never run Magnaflow 2.5" Stainless Steel Tailpipes. I couldn't use them on my truck because it was lowered and c-notched. These fit '67-'72 C-10s at stock height and sell for around $115 each. They come complete with hangers and hardware.

Asking $100 for BOTH tailpipes plus shipping. FIRST I WILL TAKE THEM GETS THEM. I WILL NOT HOLD THESE. I will quote shipping but these are pretty heavy and will need a pretty big box.

POP

**SIXTY9** · 12-30-2017, 05:44 PM

Do you think they would fit with the Camaro gas tank like you installed? If so I am interested, I lowered my 69 1 1/2 inches in the rear. I can arrange pick up depending on what part of Chattanooga you are located

**CC69Rat** · 12-30-2017, 08:39 PM

Here is a video that kinda shows the exit for the Magnaflow kit. (part #16643) What were selling here is the pre-bend pipes from the exit on the muffler, over the axle and out the back. From the looks of the tail pieces on the video it looks like the Camaro tank would clear (?) but it's hard to say.. just trying to come up with some sort of visual reference for how these exit out the back.

Just me ( just my opinion ) the truck in the video without the rear bumper kinda shows the exhaust more than it would show with the bumper on. These are really nice pre-bend (mandrel bent) pieces we just didnt use. They've never been bolted to a truck. We're just hoping someone can use them. If I remember the exhaust kit was around $600 bucks. We used some of it, lost one muffler off the truck when it was on a trailer, changed to the bullet type Magnaflows, etc. Ive had this kit for a while just never used the rear pieces.

https://www.youtube.com/watch?v=2HEgcApEnqM

**SIXTY9** · 12-30-2017, 09:21 PM

Looks like they should work, Can you PM me your info to get them picked up, or give me a call? I am sending you a PM now with # now.

Thanks
Wally

NoNeck · 12-30-2017, 09:33 PM

Wally, PM sent. If you sent your PM to Chad (CC69Rat) he is my son. If you want me to call you, put your phone # in your reply to me. Thanks

POP

**SIXTY9** · 12-30-2017, 09:59 PM

Pop,

I will take them. I sent you a PM.
Wally

NoNeck · 12-30-2017, 10:26 PM

SOLD to SIXTY9. Thank you sir!

POP

12-30-2017, 05:44 PM	#2
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 503	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes Do you think they would fit with the Camaro gas tank like you installed? If so I am interested, I lowered my 69 1 1/2 inches in the rear. I can arrange pick up depending on what part of Chattanooga you are located

12-30-2017, 08:39 PM	#3
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes Here is a video that kinda shows the exit for the Magnaflow kit. (part #16643) What were selling here is the pre-bend pipes from the exit on the muffler, over the axle and out the back. From the looks of the tail pieces on the video it looks like the Camaro tank would clear (?) but it's hard to say.. just trying to come up with some sort of visual reference for how these exit out the back. Just me ( just my opinion ) the truck in the video without the rear bumper kinda shows the exhaust more than it would show with the bumper on. These are really nice pre-bend (mandrel bent) pieces we just didnt use. They've never been bolted to a truck. We're just hoping someone can use them. If I remember the exhaust kit was around $600 bucks. We used some of it, lost one muffler off the truck when it was on a trailer, changed to the bullet type Magnaflows, etc. Ive had this kit for a while just never used the rear pieces. https://www.youtube.com/watch?v=2HEgcApEnqM __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

12-30-2017, 09:21 PM	#4
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 503	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes Looks like they should work, Can you PM me your info to get them picked up, or give me a call? I am sending you a PM now with # now. Thanks Wally

12-30-2017, 09:33 PM	#5
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes Wally, PM sent. If you sent your PM to Chad (CC69Rat) he is my son. If you want me to call you, put your phone # in your reply to me. Thanks POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

12-30-2017, 09:59 PM	#6
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 503	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes Pop, I will take them. I sent you a PM. Wally

12-30-2017, 03:46 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	2 New Magnaflow 2.5" Stainless Steel Tailpipes I have two new, never run Magnaflow 2.5" Stainless Steel Tailpipes. I couldn't use them on my truck because it was lowered and c-notched. These fit '67-'72 C-10s at stock height and sell for around $115 each. They come complete with hangers and hardware. Asking $100 for BOTH tailpipes plus shipping. FIRST I WILL TAKE THEM GETS THEM. I WILL NOT HOLD THESE. I will quote shipping but these are pretty heavy and will need a pretty big box. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

12-30-2017, 10:26 PM	#7
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: 2 New Magnaflow 2.5" Stainless Steel Tailpipes SOLD to SIXTY9. Thank you sir! POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.