LS to SBC Valvecover Adapters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 01-02-2018, 04:10 PM

These things are pretty trick: they use the factory valve cover gaskets and the SBC valve covers act as coil covers. Accommodates all stock types of coils. Also have provisions for PCV and oil fill.

Brand new, used for mock-up only. Includes all hardware and ships in original packaging. I’ve decided to go a different route.

Sold.

gringoloco · 01-03-2018, 12:35 PM

Prices are OBO

solidaxel · 01-05-2018, 02:08 PM

Will a Benjimen work ?

gringoloco · 01-05-2018, 02:11 PM

PM sent

whitesilverado · 01-05-2018, 02:55 PM

let me know if it fall thru I will 100 shipped to 92336

NC_John · 01-05-2018, 06:48 PM

Those are interesting. Who makes them?

solidaxel · 01-05-2018, 06:50 PM

Quote:

Originally Posted by gringoloco

PM sent

Check your PM Chris

NC_John · 01-05-2018, 07:44 PM

I'd do $150 shipped but what is the oil fill provision?

gringoloco · 01-05-2018, 10:28 PM

Quote:

Originally Posted by NC_John

Those are interesting. Who makes them?

They are from CFR Performance. Presumably their proprietary casting. Billet specialties and Taylor both market similar items, but cost $500 plus

Quote:

Originally Posted by solidaxel

Check your PM Chris

PM returned

Quote:

Originally Posted by NC_John

I'd do $150 shipped but what is the oil fill provision?

There are two npt ports on each side. Sale pending, will let you know if it falls through

NC_John · 01-05-2018, 10:34 PM

Quote:

Originally Posted by gringoloco

They are from CFR Performance. Presumably their proprietary casting. Billet specialties and Taylor both market similar items, but cost $500 plus

PM returned

There are two npt ports on each side. Sale pending, will let you know if it falls through

Sure.... if you got close to what you were asking. I'll buy a set direct from cfm.

Are the not ports sized such that they can actually pass 6 qts of oil in less than a few hours? They look pretty small.

Thanks

gringoloco · 01-05-2018, 10:38 PM

Quote:

Originally Posted by NC_John

Are the not ports sized such that they can actually pass 6 qts of oil in less than a few hours? They look pretty small.

Thanks

Haha, good point. May need to drill and tap oversized to ensure decent flow.

whitesilverado · 04-05-2018, 09:32 AM

Quote:

Originally Posted by solidaxel

Check your PM Chris

Solidaxel. You don’t get PM? Send me your contact number so we can see if we can work something out.

solidaxel · 04-05-2018, 06:54 PM

Quote:

Originally Posted by whitesilverado

Solidaxel. You don’t get PM? Send me your contact number so we can see if we can work something out.

Did you get the info on the PM?

solidaxel · 04-30-2018, 11:05 AM

They are still in the box if anyone wants them for what I have in them + the ride
I went another route

1hihum · 05-16-2018, 12:32 AM

Damn, I literally just ordered a pair of these this morning. If you don't mind me asking, what did you get for them and what route did you end up going?

solidaxel · 05-16-2018, 09:16 AM

I still have these F S for what I have in them..... Ben Franklin + shipping
See post #3 and #14

1hihum · 05-16-2018, 12:53 PM

How much is that (no price anywhere in the thread)?

Custom 68 · 05-16-2018, 03:56 PM

100 bucks...

solidaxel · 05-16-2018, 04:19 PM

Quote:

Originally Posted by Custom 68

100 bucks...

Thanks Dave !

1hihum · 05-17-2018, 01:55 AM

Thank you (sorry I missed the price). I checked on my order and it was shipped the same day so I'm gonna pass.

solidaxel · 06-05-2018, 04:55 PM

Anybody else interested?
I Still have them

solidaxel · 06-28-2018, 09:08 AM

I'm sure someone can use these adapters, still F S !

chevyguy_72 · 06-29-2018, 04:39 PM

Quote:

Originally Posted by solidaxel

I'm sure someone can use these adapters, still F S !

I thought you sold the adapters on the first post?

solidaxel · 06-29-2018, 05:29 PM

Yes GRINGOLOCO sold them to me,solidaxel, and I changed directions and made my own
and did not use them!
They are still in the box and F S
Are you interested, let me know.
See post#14

Willie Makeit · 08-19-2018, 10:11 AM

available?

01-03-2018, 12:35 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: LS to SBC Valvecover Adapters Prices are OBO __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-05-2018, 02:11 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: LS to SBC Valvecover Adapters PM sent __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-05-2018, 02:55 PM	#5
whitesilverado Registered User Join Date: Apr 2010 Location: Inland Empire, CA Posts: 18	Re: LS to SBC Valvecover Adapters let me know if it fall thru I will 100 shipped to 92336

01-05-2018, 06:48 PM	#6
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: LS to SBC Valvecover Adapters Those are interesting. Who makes them? __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

01-05-2018, 07:44 PM	#8
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: LS to SBC Valvecover Adapters I'd do $150 shipped but what is the oil fill provision? __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

01-02-2018, 04:10 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	LS to SBC Valvecover Adapters These things are pretty trick: they use the factory valve cover gaskets and the SBC valve covers act as coil covers. Accommodates all stock types of coils. Also have provisions for PCV and oil fill. Brand new, used for mock-up only. Includes all hardware and ships in original packaging. I’ve decided to go a different route. Sold. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-06-2018 at 11:49 AM.

01-05-2018, 02:08 PM	#3
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters Will a Benjimen work ? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

04-30-2018, 11:05 AM	#14
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters They are still in the box if anyone wants them for what I have in them + the ride I went another route Attached Images __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

05-16-2018, 12:32 AM	#15
1hihum Registered User Join Date: Feb 2014 Location: Land of the Lost...Bay area,CA Posts: 80	Re: LS to SBC Valvecover Adapters Damn, I literally just ordered a pair of these this morning. If you don't mind me asking, what did you get for them and what route did you end up going?

05-16-2018, 09:16 AM	#16
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters I still have these F S for what I have in them..... Ben Franklin + shipping See post #3 and #14 __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

05-16-2018, 12:53 PM	#17
1hihum Registered User Join Date: Feb 2014 Location: Land of the Lost...Bay area,CA Posts: 80	Re: LS to SBC Valvecover Adapters How much is that (no price anywhere in the thread)?

05-16-2018, 03:56 PM	#18
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	Re: LS to SBC Valvecover Adapters 100 bucks... __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

05-17-2018, 01:55 AM	#20
1hihum Registered User Join Date: Feb 2014 Location: Land of the Lost...Bay area,CA Posts: 80	Re: LS to SBC Valvecover Adapters Thank you (sorry I missed the price). I checked on my order and it was shipped the same day so I'm gonna pass.

06-05-2018, 04:55 PM	#21
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters Anybody else interested? I Still have them __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

06-28-2018, 09:08 AM	#22
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters I'm sure someone can use these adapters, still F S ! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42



Register or Log In To remove these advertisements.

06-29-2018, 05:29 PM	#24
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LS to SBC Valvecover Adapters Yes GRINGOLOCO sold them to me,solidaxel, and I changed directions and made my own and did not use them! They are still in the box and F S Are you interested, let me know. See post#14 __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

08-19-2018, 10:11 AM	#25
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,230	Re: LS to SBC Valvecover Adapters available?

Register or Log In To remove these advertisements.