Where can I find this bolt and washer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superhondaz50 · 01-09-2018, 05:38 PM

One that fits in this shaft? Thanks

TheRocket · 01-09-2018, 06:00 PM

Did you try your locally owned parts store? Mine (CarQuest) can get it for you if they don't have it in stock.

superhondaz50 · 01-09-2018, 06:14 PM

I have an O'Reilly auto and a AutoZone, they looked at me cross-eyed when I asked for it. I'll see if I can find it at carquest.

demian5 · 01-09-2018, 07:16 PM

That there be one of them slip yokes them lowered truck guys be talkin 'bout. It don't need no bolt, it slips!

superhondaz50 · 01-09-2018, 07:17 PM

Haha pretty sure it needs a bolt

Rufas · 01-09-2018, 08:36 PM

What does the bolt secure?

wpavlis · 01-09-2018, 09:33 PM

Maybe a driveshaft shop would have one?

superhondaz50 · 01-09-2018, 09:36 PM

Quote:

Originally Posted by Rufas

What does the bolt secure?

So the carrier gets pressed on the shaft, then a yoke goes on, the the bolt and washer to hold on the yoke.

superhondaz50 · 01-09-2018, 09:38 PM

http://www.dennysdriveshaft.com/p59_...r_and_fla.html

Here it is at Denny's, but like everything else, it's not in stock.

**LockDoc** · 01-09-2018, 09:49 PM

Quote:

Originally Posted by demian5

That there be one of them slip yokes them lowered truck guys be talkin 'bout. It don't need no bolt, it slips!

That isn't a slip yoke.

LockDoc

superhondaz50 · 01-09-2018, 09:56 PM

Quote:

Originally Posted by LockDoc

That isn't a slip yoke.

LockDoc

+1 to that.

dell72 · 01-09-2018, 11:33 PM

Fastenal, Grainger, McMaster Carr.

**Steeveedee** · 01-09-2018, 11:44 PM

Quote:

Originally Posted by LockDoc

That isn't a slip yoke.

LockDoc

Nope. That's the join between the front and rear drive shafts where the carrier bearing lives, and needs a bolt. It does not slip, unless you are really unlucky. I don't remember the size, but you can try both 3/8-24 and 7/16-20 (fine thread). One of them should work. Then just get a thick fender washer. Or go to the local pick your part yard and get the "exact" replacement.

superhondaz50 · 01-09-2018, 11:50 PM

Quote:

Originally Posted by Steeveedee

Nope. That's the join between the front and rear drive shafts where the carrier bearing lives, and needs a bolt. It does not slip, unless you are really unlucky. I don't remember the size, but you can try both 3/8-24 and 7/16-20 (fine thread). One of them should work. Then just get a thick fender washer. Or go to the local pick your part yard and get the "exact" replacement.

Perfect, I'll order both.

superhondaz50 · 01-10-2018, 01:36 AM

Had the magic idea to use my tap set to find the right size. It is 1/2x20. I chased the rusty threads and it went right down. Also found the hole is drilled a little wonky. Washer is 1.5" wide.

**Steeveedee** · 01-10-2018, 01:28 PM

1/2". huh, guess I haven't looked at one in a while.

superhondaz50 · 01-10-2018, 01:52 PM

Quote:

Originally Posted by Steeveedee

1/2". huh, guess I haven't looked at one in a while.

Yup, granted it is possible someone enlarged it from 7/16 to 1/2 at some point in the past 50yrs, could explain the wonky hole.

01-09-2018, 05:38 PM	#1
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Where can I find this bolt and washer? One that fits in this shaft? Thanks

01-09-2018, 06:00 PM	#2
TheRocket Registered User Join Date: Mar 2016 Location: Goodwell, OK Posts: 63	Re: Where can I find this bolt and washer? Did you try your locally owned parts store? Mine (CarQuest) can get it for you if they don't have it in stock.

01-09-2018, 06:14 PM	#3
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Re: Where can I find this bolt and washer? I have an O'Reilly auto and a AutoZone, they looked at me cross-eyed when I asked for it. I'll see if I can find it at carquest.

01-09-2018, 07:16 PM	#4
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: Where can I find this bolt and washer? That there be one of them slip yokes them lowered truck guys be talkin 'bout. It don't need no bolt, it slips! __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

01-09-2018, 07:17 PM	#5
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Re: Where can I find this bolt and washer? Haha pretty sure it needs a bolt

01-09-2018, 08:36 PM	#6
Rufas Registered User Join Date: May 2016 Location: Fort Mohave, AZ Posts: 366	Re: Where can I find this bolt and washer? What does the bolt secure? __________________ 1970 GMC 2500 700R Trans RideTech 4 link rear suspension - Air Bagged on all four corners 350 SBC 300hp Weiand Supercharger FiTech EFI

01-09-2018, 09:33 PM	#7
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Where can I find this bolt and washer? Maybe a driveshaft shop would have one?

01-09-2018, 09:38 PM	#9
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Re: Where can I find this bolt and washer? http://www.dennysdriveshaft.com/p59_...r_and_fla.html Here it is at Denny's, but like everything else, it's not in stock.

01-09-2018, 11:33 PM	#12
dell72 Registered User Join Date: Jul 2013 Location: Southern Wisconsin Posts: 126	Re: Where can I find this bolt and washer? Fastenal, Grainger, McMaster Carr.

01-10-2018, 01:36 AM	#15
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Re: Where can I find this bolt and washer? Had the magic idea to use my tap set to find the right size. It is 1/2x20. I chased the rusty threads and it went right down. Also found the hole is drilled a little wonky. Washer is 1.5" wide.

01-10-2018, 01:28 PM	#16
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,335	Re: Where can I find this bolt and washer? 1/2". huh, guess I haven't looked at one in a while. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.