PA Yet another 72 going under the torch, factory 3 speed on the tree! - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 01-11-2018, 05:08 PM

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

**1rippen6** · 01-11-2018, 10:58 PM

Quote:

Originally Posted by smbrouss70

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

Will do it this weekend.

**1rippen6** · 01-13-2018, 01:00 PM

Quote:

Originally Posted by smbrouss70

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

Medium flat rate for 15 looks like the best shipping option. I also completed the repair on the latch. I will PM my PP info.

**1rippen6** · 01-13-2018, 02:21 PM

Quote:

Originally Posted by mortoyz

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

Here is a set but I have a better set didn't realized they had groove until I carried them to the house LOL

**1rippen6** · 01-13-2018, 02:27 PM

Quote:

Originally Posted by 2006gmcdmax

Sounds good, thanks.

Not sure I can help I cut the floor nuts out of the other blazer and they are rusty please see pictures. It didn't help that someone sprayed foam under everything on this blazer I sure it held moisture in. I took a closer look at the spare tire nuts and they look good externally but the thread look like they might have some issues hard to tell because they are fine thread. I can run a tap through them if you are still interested.

2006gmcdmax · 01-14-2018, 03:48 AM

Quote:

Originally Posted by 1rippen6

Not sure I can help I cut the floor nuts out of the other blazer and they are rusty please see pictures. It didn't help that someone sprayed foam under everything on this blazer I sure it held moisture in. I took a closer look at the spare tire nuts and they look good externally but the thread look like they might have some issues hard to tell because they are fine thread. I can run a tap through them if you are still interested.

I think I would be willing to pay you more for something more solid than what's pictured. If the others just need a tap run through them and the blast clean then, yes I interested. Thanks 1rippen6.

**1rippen6** · 01-14-2018, 01:17 PM

Quote:

Originally Posted by mortoyz

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

Here is a picture of a better catch 20.

**1rippen6** · 01-14-2018, 06:23 PM

Quote:

Originally Posted by 2006gmcdmax

I think I would be willing to pay you more for something more solid than what's pictured. If the others just need a tap run through them and the blast clean then, yes I interested. Thanks 1rippen6.

Threads cleaned up better than I thought 23 shipped for the pair.

**mortoyz** · 01-14-2018, 08:33 PM

Quote:

Originally Posted by 1rippen6

Here is a picture of a better catch 20.

I’ll take it. What will the total be with front hold down brackets?

**1rippen6** · 01-14-2018, 11:06 PM

Quote:

Originally Posted by mortoyz

I’ll take it. What will the total be with front hold down brackets?

52 total shipped

smbrouss70 · 01-15-2018, 03:57 AM

Quote:

Originally Posted by 1rippen6

Medium flat rate for 15 looks like the best shipping option. I also completed the repair on the latch. I will PM my PP info.

Paypal sent, Thanks Dwayne!

**1rippen6** · 01-15-2018, 07:50 AM

Quote:

Originally Posted by smbrouss70

Paypal sent, Thanks Dwayne!

Received I will box up tonight should ship out tomorrow.

**1rippen6** · 01-17-2018, 10:51 PM

Here you go.

tocker1 · 02-15-2018, 12:24 AM

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

**1rippen6** · 02-15-2018, 08:33 AM

Quote:

Originally Posted by tocker1

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

Yes. I have those parts but not the nicest pieces. I will get some pictures tomorrow I have plans tonight. That should be everything you need except for the seat and clamps on the front but they are reproduced.

**1rippen6** · 02-17-2018, 11:46 AM

Quote:

Originally Posted by tocker1

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

I'm having trouble loading pictures will try again later tonight.

**1rippen6** · 02-17-2018, 02:36 PM

Pics

**1rippen6** · 02-17-2018, 02:37 PM

Top plate on picture below has some holes the rest are decent.

**1rippen6** · 02-17-2018, 02:38 PM

Now last

rossboss · 02-21-2018, 06:25 PM

do you have a folding jack handle,

**1rippen6** · 02-21-2018, 10:25 PM

Quote:

Originally Posted by rossboss

do you have a folding jack handle,

I do but think they are a couple inches longer then the original for a blazer.

**leddzepp** · 02-22-2018, 11:34 AM

Do you have any 4x4 dipstick/tube setups available? Thanks!

**1rippen6** · 02-22-2018, 11:49 AM

Sorry, I have the dipstick no tube the mounting tab was rusted off.

**leddzepp** · 02-22-2018, 11:57 AM

Thanks, appreciate you checking!

SVFK5 · 03-08-2019, 10:55 AM

Are you selling the frame?

01-11-2018, 05:08 PM	#176
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Yet another 72 going under the torch, factory 3 speed on the tree! $80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-17-2018, 10:51 PM	#188
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,833	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Here you go. Attached Images

02-15-2018, 12:24 AM	#189
tocker1 Registered User Join Date: Jun 2015 Location: Modesto Ca Posts: 82	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

02-17-2018, 02:36 PM	#192
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,833	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Pics Attached Images

02-17-2018, 02:37 PM	#193
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,833	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Top plate on picture below has some holes the rest are decent.

02-17-2018, 02:38 PM	#194
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,833	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Now last Attached Images

02-21-2018, 06:25 PM	#195
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Re: Yet another 72 going under the torch, factory 3 speed on the tree! do you have a folding jack handle,

02-22-2018, 11:34 AM	#197
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,117	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Do you have any 4x4 dipstick/tube setups available? Thanks! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-22-2018, 11:49 AM	#198
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,833	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Sorry, I have the dipstick no tube the mounting tab was rusted off.

02-22-2018, 11:57 AM	#199
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,117	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Thanks, appreciate you checking! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-08-2019, 10:55 AM	#200
SVFK5 Registered User Join Date: Mar 2019 Location: Grand Rapids Posts: 13	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Are you selling the frame?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.