F/S Targetmaster 292 engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qksilver · 12-17-2006, 09:45 PM

I have a 74-78 Goodwrench Targetmaster longblock 292 engine for sale. It was payment for a V-8 swap I did. Engine has 18,000 miles and ran very well. I pulled it out about 3 months ago and it is sitting in my 65 truck.
Comes with intake and manifold, dist and wires, alt bracket, crank pulley, and passengerside motor mount.

$300 OBO
I will NOT ship, I am located 30 miles west of Fort Bragg NC
If you want more pix give me email and I will send.

Thanks,
Steve

**PICKMUP** · 12-18-2006, 12:04 AM

Oh, that is a GREAT deal. I hate those, "wish you were closer" posts, but this time---wish you were closer!!!

qksilver · 12-18-2006, 05:07 PM

I thought so to, I was going to use it in my 67 4x4 that I am restoring back to factory. I did some searching in a shop that is being sold. They have been doing meduim and large trucks since the 30's. I found a complete 67 . correct date code, factory replacement 292.

qksilver · 12-19-2006, 10:34 PM

ttt

hotrodmtodd · 12-20-2006, 10:58 AM

Steve,
Would you consider $300 minus gas from Williamsburg VA and back? I'm sure I could talk my Dad into a quick trip to Fayetteville if I bribed him with gas money. It is undoubtedly worth $300, but since you posted it that way, give me your "best offer" price and I will talk him into it. This motor is a combination of "wish you were closer" AND "can't pass it up" that I should be able to work out! Let me know. Thanks, Mike

qksilver · 12-20-2006, 07:08 PM

Depends on what you are driving!
things are tight but how about $275? I had about 15 hours in the engine swap. Let me know...........
Pm me and give me your email, I will send more pix and my phone#
Thanks,
Steve

hotrodmtodd · 12-20-2006, 11:33 PM

Sounds GREAT Steve. PM sent. Just checking, if I pay you, can it sit where it is, or do you need to get it out of there quick? My Dad sells antique furniture in Williamsburg, so he stays pretty busy, but I know he would pick it up for me, but it would have to be when he can fit it in with HIS schedule. Please let me know. Thanks, Mike

qksilver · 12-23-2006, 09:58 AM

Sold pending payment................

Badger3 · 01-13-2018, 08:48 PM

Hello,Did your engine sell?

CaptRMW · 01-13-2018, 08:58 PM

If not he likely made a boat anchor out of it sometime in the 11 years since he posted the ad.

Badger3 · 01-13-2018, 11:21 PM

First 292 engine I've seen and didn't even look at the date.I have a anchor already,don't need another.

12-17-2006, 09:45 PM	#1
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	F/S Targetmaster 292 engine I have a 74-78 Goodwrench Targetmaster longblock 292 engine for sale. It was payment for a V-8 swap I did. Engine has 18,000 miles and ran very well. I pulled it out about 3 months ago and it is sitting in my 65 truck. Comes with intake and manifold, dist and wires, alt bracket, crank pulley, and passengerside motor mount. $300 OBO I will NOT ship, I am located 30 miles west of Fort Bragg NC If you want more pix give me email and I will send. Thanks, Steve Attached Images

12-18-2006, 12:04 AM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: F/S Targetmaster 292 engine Oh, that is a GREAT deal. I hate those, "wish you were closer" posts, but this time---wish you were closer!!!

12-18-2006, 05:07 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: F/S Targetmaster 292 engine I thought so to, I was going to use it in my 67 4x4 that I am restoring back to factory. I did some searching in a shop that is being sold. They have been doing meduim and large trucks since the 30's. I found a complete 67 . correct date code, factory replacement 292.

12-19-2006, 10:34 PM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: F/S Targetmaster 292 engine ttt

12-20-2006, 10:58 AM	#5
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: F/S Targetmaster 292 engine Steve, Would you consider $300 minus gas from Williamsburg VA and back? I'm sure I could talk my Dad into a quick trip to Fayetteville if I bribed him with gas money. It is undoubtedly worth $300, but since you posted it that way, give me your "best offer" price and I will talk him into it. This motor is a combination of "wish you were closer" AND "can't pass it up" that I should be able to work out! Let me know. Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

12-20-2006, 07:08 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: F/S Targetmaster 292 engine Depends on what you are driving! things are tight but how about $275? I had about 15 hours in the engine swap. Let me know........... Pm me and give me your email, I will send more pix and my phone# Thanks, Steve

12-20-2006, 11:33 PM	#7
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: F/S Targetmaster 292 engine Sounds GREAT Steve. PM sent. Just checking, if I pay you, can it sit where it is, or do you need to get it out of there quick? My Dad sells antique furniture in Williamsburg, so he stays pretty busy, but I know he would pick it up for me, but it would have to be when he can fit it in with HIS schedule. Please let me know. Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

12-23-2006, 09:58 AM	#8
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: F/S Targetmaster 292 engine Sold pending payment................

01-13-2018, 08:48 PM	#9
Badger3 Registered User Join Date: Jan 2018 Location: Balsam Grove,NC Posts: 2	Re: F/S Targetmaster 292 engine Hello,Did your engine sell?

01-13-2018, 08:58 PM	#10
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: F/S Targetmaster 292 engine If not he likely made a boat anchor out of it sometime in the 11 years since he posted the ad.

01-13-2018, 11:21 PM	#11
Badger3 Registered User Join Date: Jan 2018 Location: Balsam Grove,NC Posts: 2	Re: F/S Targetmaster 292 engine First 292 engine I've seen and didn't even look at the date.I have a anchor already,don't need another.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.