fuel pressure regulator mounting??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 04-22-2004, 01:48 PM

what would i need to mount a pressure regulator between the inlet fittings on a holley or demon carb?

i've seen it done before. the line from the fuel pump goes to the inlet on the regulator. and then the 2 outlets on it curve up to the inlets on the carb.

79BIG10 · 04-22-2004, 10:50 PM

You need to set the regulator before the T fitting rather than what I'm thinking you're wanting to do which would be after that. I know Matt (blackbeast) had that setup like that on his monster engine 406?

ocbaud · 04-22-2004, 10:51 PM

Quote:

Originally posted by 79BIG10
I know Matt (blackbeast) had that setup like that on his monster engine 406?

thats where i got the idear from

79BIG10 · 04-22-2004, 10:57 PM

You need a pic? I may have one still.

bigblock73 · 04-22-2004, 10:59 PM

Quote:

Originally posted by 79BIG10
You need a pic? I may have one still.

I want to see it.

ocbaud · 04-22-2004, 11:08 PM

i was watching the video of our 2002 meet and saw it. i thought it was neat. i was just wondering what fittings i would need to do it. i figured it up with braided hose and an fittings, but dang thats a lot of money. he has it done with chrome pipes and fittings

79BIG10 · 04-22-2004, 11:15 PM

I would use aluminum line from Summit and a flare tool and tubing bender. Steel works but another member showed me how much aluminum is more forgiving and doesn't break like steel

Tom · 04-22-2004, 11:29 PM

I ran the gas line from the frame up to the regulator on the fender, then up to the fuel line for my holley. I used the second opening for a pressure gauge.

79BIG10 · 04-22-2004, 11:41 PM

Here's the best pic of the engine I have. You can see where the fuel line comes up at the front of the engine but then it goes into a flared T then has equal lenghts to both fuel bowls. This makes the flow even he said. Eric may be able to get a better pic off the video.

ocbaud · 04-23-2004, 12:12 AM

79BIG10 · 04-23-2004, 12:18 AM

thanks Eric

ocbaud · 04-23-2004, 12:21 AM

Quote:

Originally posted by 79BIG10
thanks Eric

i had to figure out how to do the screen capture.

you have to turn video acceloration down halfway in windows media player, or it wont copy the video when you hit print-screen.

ocbaud · 04-23-2004, 01:59 AM

i can take care of the alum. tubing, flaring and bending and so forth, but i need somewhere to order those fittings. i would be getting this regulator:
http://www.jegs.com/cgi-bin/ncommerc...61&prmenbr=361
it uses 3/8 npt

i would like it to look as much like the picture i posted as possible.

the speed demon carb uses 9/16 -24 fittings on the carb

toytruck · 04-24-2004, 12:46 AM

So how do you adjust it mounted upside down? What kind of fuel pump you running?

79BIG10 · 04-24-2004, 01:44 PM

Eric you're going to have to go to Auto Zone or O'Rilleys and get the fittings. You will need 3/8 male thread with a fitting to fit a inverted flare of whatever size you need for that fuel line to the bowl. Then you need the inverted flare to fit thatfitting you just installed in the regulator. Same thing for the bowl but it needs to be 9/16 instead of the 3/8.

Cole's 87 · 04-24-2004, 02:29 PM

I'm kinda wondering what fuel pump your running that would require you to use a regulator. There are plenty of low pressure high volume pumps out there that would easily feed your engine. You could spend your money on something else.

Me I would just try to keep your combo simple the more stuff you add the more that goes wrong.

79BIG10 · 04-26-2004, 12:53 AM

He's running an electric Holey pump I think. With that you need to have a fuel regulator.

low 84 · 04-26-2004, 01:07 AM

i think he is running the same mechanical holley that i have, which is preset form the factory and dosen't need a regulator

ocbaud · 04-26-2004, 01:09 AM

Quote:

Originally posted by low 84
i think he is running the same mechanical holley that i have, which is preset form the factory and dosen't need a regulator

matt or me?

i'm running a 110gph holley

Cole's 87 · 04-26-2004, 02:21 PM

Eric,
I have the Holley 110 on my big block and you do not need a regulator. I havent had any problems with the pump blowing the float off its seat. I will say that you picked a great mecanical pump it resolved alot of my fuel starvation problems. @ 5500 RPM I still have 6psi

ocbaud · 04-26-2004, 04:10 PM

Quote:

Originally posted by Cole's 87
Eric,
I have the Holley 110 on my big block and you do not need a regulator. I havent had any problems with the pump blowing the float off its seat. I will say that you picked a great mecanical pump it resolved alot of my fuel starvation problems. @ 5500 RPM I still have 6psi

good, i was wondering if it would be pushing to much pressure.

04-22-2004, 01:48 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	fuel pressure regulator mounting??? what would i need to mount a pressure regulator between the inlet fittings on a holley or demon carb? i've seen it done before. the line from the fuel pump goes to the inlet on the regulator. and then the 2 outlets on it curve up to the inlets on the carb.

04-22-2004, 10:50 PM	#2
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	You need to set the regulator before the T fitting rather than what I'm thinking you're wanting to do which would be after that. I know Matt (blackbeast) had that setup like that on his monster engine 406? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-22-2004, 10:57 PM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	You need a pic? I may have one still. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-22-2004, 11:15 PM	#7
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	I would use aluminum line from Summit and a flare tool and tubing bender. Steel works but another member showed me how much aluminum is more forgiving and doesn't break like steel __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-22-2004, 11:29 PM	#8
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,720	I ran the gas line from the frame up to the regulator on the fender, then up to the fuel line for my holley. I used the second opening for a pressure gauge. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-22-2004, 11:08 PM	#6
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i was watching the video of our 2002 meet and saw it. i thought it was neat. i was just wondering what fittings i would need to do it. i figured it up with braided hose and an fittings, but dang thats a lot of money. he has it done with chrome pipes and fittings

04-22-2004, 11:41 PM	#9
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Here's the best pic of the engine I have. You can see where the fuel line comes up at the front of the engine but then it goes into a flared T then has equal lenghts to both fuel bowls. This makes the flow even he said. Eric may be able to get a better pic off the video. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-23-2004, 12:12 AM	#10
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129

04-23-2004, 12:18 AM	#11
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	thanks Eric __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-23-2004, 01:59 AM	#13
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i can take care of the alum. tubing, flaring and bending and so forth, but i need somewhere to order those fittings. i would be getting this regulator: http://www.jegs.com/cgi-bin/ncommerc...61&prmenbr=361 it uses 3/8 npt i would like it to look as much like the picture i posted as possible. the speed demon carb uses 9/16 -24 fittings on the carb Last edited by ocbaud; 04-23-2004 at 02:04 AM.

04-24-2004, 12:46 AM	#14
toytruck 5-7 dropped 87 CC Dually Join Date: Sep 2003 Location: bay city mi Posts: 326	So how do you adjust it mounted upside down? What kind of fuel pump you running? __________________ I rather be in my 77 Sanger Picklefork Jet Hydro!

04-24-2004, 01:44 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Eric you're going to have to go to Auto Zone or O'Rilleys and get the fittings. You will need 3/8 male thread with a fitting to fit a inverted flare of whatever size you need for that fuel line to the bowl. Then you need the inverted flare to fit thatfitting you just installed in the regulator. Same thing for the bowl but it needs to be 9/16 instead of the 3/8. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-24-2004, 02:29 PM	#16
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	I'm kinda wondering what fuel pump your running that would require you to use a regulator. There are plenty of low pressure high volume pumps out there that would easily feed your engine. You could spend your money on something else. Me I would just try to keep your combo simple the more stuff you add the more that goes wrong.

04-26-2004, 12:53 AM	#17
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	He's running an electric Holey pump I think. With that you need to have a fuel regulator. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-26-2004, 01:07 AM	#18
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i think he is running the same mechanical holley that i have, which is preset form the factory and dosen't need a regulator __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's



Register or Log In To remove these advertisements.

04-26-2004, 02:21 PM	#20
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	Eric, I have the Holley 110 on my big block and you do not need a regulator. I havent had any problems with the pump blowing the float off its seat. I will say that you picked a great mecanical pump it resolved alot of my fuel starvation problems. @ 5500 RPM I still have 6psi

Register or Log In To remove these advertisements.