OK WTB woodgrain decal

[Robert Martin]

Would like to buy a NOS woodgrain decal for 72 dash cluster.

[jocko]

Best quality I've found are from the cheyenne superman on ebay. Here's the gb door applique, but you might contact him to see if he has any dash cluster woodgrain in his stash. Not certain it is NOS, but it is the same quality and thickness, it's not a decal that peels off. NOS very hard to come by. He might have a woodgrain bezel rather than the applique by itself (that's what I purchased from him, it was a nice piece) https://www.ebay.com/itm/1971-1972-C...zo6FXZuESBz36Q

[Robert Martin]

I've got the glove box piece and I think it's from the same guy. But he's not showing to have the dash cluster decal.

[jocko]

Originally Posted by Robert Martin

I've got the glove box piece and I think it's from the same guy. But he's not showing to have the dash cluster decal.

Yep, I realize that, that's why I mention sending him a note on ebay, he pretty much always lists the same 2 parts he's currently listing.

[TBONE1964]

Very Important Info:

Aftermarket wood grain or any other wood grain cut has to match it's bezel.

For example, if you do find an NOS decal, it will not fit correctly on a aftermarket bezel. The same thing the other way, a aftermarket wood grain decal will not fit a OE or NOS bezel.

If you are cutting your own, then no issue. If you are looking to cut your own, check 3M DI-NOC on line.

Word of caution, most of the aftermarket decals you can buy though LMC, Brothers, etc, are not good quality and will peel up in time.

Hope this helps,
Tom

[Robert Martin]

I'll send a message to the guy. And yeah I've heard that it's hard to get one to fit the other on aftermarket. Might as well just get an aftermarket woodgrain bezel complete it sounds like.