CO Restored Tach/Vac gauge cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Curtb1971** · 01-27-2018, 05:39 PM

Up for grabs is a restored V8 tachometer/vacuum instrument cluster using all oem gauges(70-72 speedometer, 60lbs oil gauge). The bezel and circuit board is new aftermarket. The lens was a older aftermarket replacement and actually matches the gauge paint very well compared to some. The tach has a slight fade on the black but mint green pattern is great. Im not going to say its 100% perfect but for being old oem truck parts it turned out pretty nice. Work included
-Bead blast and paint tins
-Polish lens
-Tediously clean gauge faces and repaint needles
-Oil/grease moving parts
-Odometer set to "zero" miles
-Assembled with reconditioned oem and new stainless hardware
-Test gauges for proper function.

Included- is the vacuum line fitting for vacation gauge and some nice wiper/light switch bezels for a clean install

$650(SOLD) shipped/insured conus in foam lined box
Note: Can swap the 60lbs oil gauge for an 80lbs for an additional $25

**Curtb1971** · 01-27-2018, 05:45 PM

More pics

**Curtb1971** · 01-27-2018, 05:47 PM

Juiced up

**Curtb1971** · 01-27-2018, 06:14 PM

Vacuum gauge fitting, wiper/light bezels and 80lbs oil gauge

countr · 01-27-2018, 06:38 PM

Nice work Curt! Someone will be getting a nice Cluster!

bow-tie-bandit · 01-28-2018, 04:59 AM

I will take it with 80 lb gauge. send me payment info

bow-tie-bandit · 01-28-2018, 05:01 AM

I will take it with the 80 lb oil gauge. Send me payment info

**Curtb1971** · 01-28-2018, 12:34 PM

Quote:

Originally Posted by bow-tie-bandit

I will take it with the 80 lb oil gauge. Send me payment info

You got it

Pm with payment info sent, Thanks, Curt

**TBONE1964** · 01-28-2018, 07:00 PM

Very nice Curt. I can see your passion to build these clusters. It shows in your work. It takes a little more than a new bezel and some lens polishing to restore these and make them look just as good on the back as they do the front.

Good buy and good sell,

Tom

bow-tie-bandit · 01-28-2018, 07:19 PM

Payment sent thru paypal. Thanks.

**Curtb1971** · 01-28-2018, 07:49 PM

Quote:

Originally Posted by bow-tie-bandit

Payment sent thru paypal. Thanks.

Payment received, I'll get this headed your way on Tuesday and pm the tracking. Thanks, Curt

**Curtb1971** · 01-28-2018, 08:13 PM

Quote:

Originally Posted by countr

Nice work Curt! Someone will be getting a nice Cluster!

Thanks Russ!

Quote:

Originally Posted by TBONE1964

Very nice Curt. I can see your passion to build these clusters. It shows in your work. It takes a little more than a new bezel and some lens polishing to restore these and make them look just as good on the back as they do the front.

Good buy and good sell,

Tom

Thanks Tom! You know as well as anybody what it takes to make one of these nice. I'm glad this one is going to live in a truck again. Appreciate your kind words

BLT-NT-BOT · 01-28-2018, 09:19 PM

I have had Curt do 2 clusters for me and you will not be disappointed! Great job Curt.

Jothan

01-27-2018, 05:39 PM	#1
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Restored Tach/Vac gauge cluster Up for grabs is a restored V8 tachometer/vacuum instrument cluster using all oem gauges(70-72 speedometer, 60lbs oil gauge). The bezel and circuit board is new aftermarket. The lens was a older aftermarket replacement and actually matches the gauge paint very well compared to some. The tach has a slight fade on the black but mint green pattern is great. Im not going to say its 100% perfect but for being old oem truck parts it turned out pretty nice. Work included -Bead blast and paint tins -Polish lens -Tediously clean gauge faces and repaint needles -Oil/grease moving parts -Odometer set to "zero" miles -Assembled with reconditioned oem and new stainless hardware -Test gauges for proper function. Included- is the vacuum line fitting for vacation gauge and some nice wiper/light switch bezels for a clean install $650(SOLD) shipped/insured conus in foam lined box Note: Can swap the 60lbs oil gauge for an 80lbs for an additional $25 Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com Last edited by Curtb1971; 02-06-2018 at 12:36 AM.

01-27-2018, 05:45 PM	#2
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored Tach/Vac gauge cluster More pics Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

01-27-2018, 05:47 PM	#3
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored Tach/Vac gauge cluster Juiced up Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

01-27-2018, 06:14 PM	#4
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored Tach/Vac gauge cluster Vacuum gauge fitting, wiper/light bezels and 80lbs oil gauge Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

01-27-2018, 06:38 PM	#5
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,009	Re: Restored Tach/Vac gauge cluster Nice work Curt! Someone will be getting a nice Cluster!

01-28-2018, 04:59 AM	#6
bow-tie-bandit Live life and be happy. Join Date: May 2003 Location: Spokane,Washington Posts: 266	Re: Restored Tach/Vac gauge cluster I will take it with 80 lb gauge. send me payment info

01-28-2018, 05:01 AM	#7
bow-tie-bandit Live life and be happy. Join Date: May 2003 Location: Spokane,Washington Posts: 266	Re: Restored Tach/Vac gauge cluster I will take it with the 80 lb oil gauge. Send me payment info

01-28-2018, 07:00 PM	#9
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Restored Tach/Vac gauge cluster Very nice Curt. I can see your passion to build these clusters. It shows in your work. It takes a little more than a new bezel and some lens polishing to restore these and make them look just as good on the back as they do the front. Good buy and good sell, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-28-2018, 07:19 PM	#10
bow-tie-bandit Live life and be happy. Join Date: May 2003 Location: Spokane,Washington Posts: 266	Re: Restored Tach/Vac gauge cluster Payment sent thru paypal. Thanks.

01-28-2018, 09:19 PM	#13
BLT-NT-BOT Registered User Join Date: Feb 2010 Location: Lehi,UT Posts: 804	Re: Restored Tach/Vac gauge cluster I have had Curt do 2 clusters for me and you will not be disappointed! Great job Curt. Jothan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.