Cup Holder Help

[85/Silverado]

My cup holders are shallow (3 1/8" x 1 1/2") and was wondering what options do I have for my Orca Cups to keep from tipping over.

[Evldoer]

Buy some steel or aluminum tube that has a tight fit to the holes. Cut it to your desired height that will hold your cup and screw or epoxy it in place.

[Bandit130]

http://www.cupholdersplus.com/1973-1...up-holder.html

[S10Fan]

I don't have a picture right now, but I've used 3" pipe, steel or PVC to make cup holders. In your situation, a flat piece of steel or aluminum, with the cup holder mounted on it, could be held in place under the console. The cup holder would be in front of the console and secured by the console itself.

[xs-style]

Test fit your cup in the cup holder from the late 90s early 2000s Silverados. if it would work for you, pull one at the pull a part. I got mine for 5 bucks. they are riveted to the seat bottoms, so that's kind of a pain. Then you could mount it to the seat frame. It's not the best picture, but this is what I have and it works for me.

[Mattchu60]

How are you liking the new seats from shop4seats? You finding them comfortable?

[85/Silverado]

Originally Posted by Mattchu60

How are you liking the new seats from shop4seats? You finding them comfortable?

There very comfy but I'm 6' tall and my head almost touches the head-liner, my wife is 5' and loves them... go figure.

[85/Silverado]

Originally Posted by Bandit130

http://www.cupholdersplus.com/1973-1...up-holder.html

I like the ashtray idea.. but my USB plug-in and my Mic for my phone fit inside the ashtray.

[Greenlee]

I bought the one from LMC that slides into the ash tray. It works pretty good for canned drinks. Most other drinks are too big for it. I quit using it because I noticed the ash tray was starting to bend at the bottom. It puts a lot of leverage on the ash tray. If you leave it in there long enough, someone will lean on it or put too much force on it and bend the ash tray. I’d like to find one like was posted above from a later model truck that attaches to the bottom of the seat.
Posted via Mobile Device

[TKCR]

Originally Posted by Greenlee

I’d like to find one like was posted above from a later model truck that attaches to the bottom of the seat.
Posted via Mobile Device

start looking around in the salvage yards. Those cupholders are standard in my Colorado. When I bought my Colorado used, the PO had taken them out for some reason. But I searched around and found a local salvage that still had them attached to the seat. They will have 2, one in the front and one in the back, well if it's a Crew Cab.

Ebay has a bunch, 2004-2012 Colorados