MN Gates, roofs, doors, fenders. MN>TX - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-27-2017, 11:26 PM

Quote:

Originally Posted by 70 C/K 20

If you have a decent tailgate left by the time you get here I may take that too. Don't happen to have a chrome front or rear bumper do you?

No bumpers, but the reddish gate is pretty decent.

I will contact everyone interested in parts about the middle of Jan. to finalize plans and get money down.

70 C/K 20 · 12-28-2017, 12:14 AM

Ok, Found bumpers and a tailgate yesterday, but still need the grille.

**too much stuff** · 01-06-2018, 11:46 PM

Bump for a few good parts left.

Acorn · 01-07-2018, 03:16 AM

I would like to be next in line for the grill if something falls through.
What part of N.Tx are you gonna be in?

In The Ten Ring · 01-07-2018, 03:18 AM

Did those doors ever get sold/picked up?

**too much stuff** · 01-07-2018, 10:57 AM

Quote:

Originally Posted by Acorn

I would like to be next in line for the grill if something falls through.
What part of N.Tx are you gonna be in?

Will be in Decatur for the swap meet.

Quote:

Originally Posted by In The Ten Ring

Did those doors ever get sold/picked up?

I believe they are spoken for.
I will finalize everybody's parts next week for what is sold and what isn't.

In The Ten Ring · 01-07-2018, 11:58 AM

I knew they were spoken for, I was just asking if that deal fell through or not as I am 2nd in line I think.

I guess it's been too cold to do much outside, can't blame anyone for that.

**too much stuff** · 01-13-2018, 10:27 PM

2 orange doors to 718jwh. $300
blue gate to garciajulian $400
69-70 grill to 70 c/k20 $100

In the ten ring in line for the 72 doors.
Acorn next in line for the grill.

70 C/K 20 · 01-13-2018, 10:57 PM

When will you be in town?

**too much stuff** · 01-13-2018, 11:03 PM

Quote:

Originally Posted by 70 C/K 20

When will you be in town?

I should be in Decatur later in the day on the 22 and at the swap meet on the 23rd

70 C/K 20 · 01-13-2018, 11:34 PM

What swap meet are you going to?

**too much stuff** · 01-13-2018, 11:50 PM

Quote:

Originally Posted by 70 C/K 20

What swap meet are you going to?

decatur

**Dieselwrencher** · 02-02-2018, 12:04 AM

Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan.

**too much stuff** · 02-04-2018, 01:52 PM

Quote:

Originally Posted by Dieselwrencher

Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan.

The 2 in post #3?
Don't think I have any extra mirrors at the moment. Are you thinking a road trip up here for a burb body, a tach dash and a couple gates???

**michael bustamante** · 02-05-2018, 06:47 PM

You got a gmc stepside gate? I can meet in northern texas

**too much stuff** · 02-05-2018, 07:14 PM

Quote:

Originally Posted by michael bustamante

You got a gmc stepside gate? I can meet in northern texas

Sorry, not anymore...

hounddogs! · 02-06-2018, 12:53 AM

How about inner fenders?

**too much stuff** · 02-07-2018, 10:18 PM

Quote:

Originally Posted by 70 C/K 20

Ok, Found bumpers and a tailgate yesterday, but still need the grille.

Are you still in for the grill?

Quote:

Originally Posted by hounddogs!

How about inner fenders?

Sorry, no good inner fenders.

12-28-2017, 12:14 AM	#27
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX Ok, Found bumpers and a tailgate yesterday, but still need the grille.

01-06-2018, 11:46 PM	#28
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Gates, roofs, doors, fenders. MN>TX Bump for a few good parts left. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-07-2018, 03:16 AM	#29
Acorn Registered User Join Date: Jul 2013 Location: Winnsboro Texas Posts: 367	Re: Gates, roofs, doors, fenders. MN>TX I would like to be next in line for the grill if something falls through. What part of N.Tx are you gonna be in? __________________ The bitterness of poor quality lingers long after the sweetness of a low price is forgotten.

01-07-2018, 03:18 AM	#30
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX Did those doors ever get sold/picked up?

01-07-2018, 11:58 AM	#32
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX I knew they were spoken for, I was just asking if that deal fell through or not as I am 2nd in line I think. I guess it's been too cold to do much outside, can't blame anyone for that.

01-13-2018, 10:27 PM	#33
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Gates, roofs, doors, fenders. MN>TX 2 orange doors to 718jwh. $300 blue gate to garciajulian $400 69-70 grill to 70 c/k20 $100 In the ten ring in line for the 72 doors. Acorn next in line for the grill. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-13-2018, 10:57 PM	#34
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX When will you be in town?

01-13-2018, 11:34 PM	#36
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX What swap meet are you going to?

02-02-2018, 12:04 AM	#38
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Gates, roofs, doors, fenders. MN>TX Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-05-2018, 06:47 PM	#40
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Gates, roofs, doors, fenders. MN>TX You got a gmc stepside gate? I can meet in northern texas __________________ 1967custom

02-06-2018, 12:53 AM	#42
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: Gates, roofs, doors, fenders. MN>TX How about inner fenders? __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.