WTB cab patch panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stroker · 04-26-2004, 11:06 PM

I'm looking for a patch panel for the drivers side upper floor board. Needing the area from above the dimmer switch to below the flange including an inch or two of the lower floor pan. Ideally I would like to weld in at the crease outlined in green. If you've got a cab that your willing to cut with this area solid let me know. Thanks.....Stroker

JimKshortstep4x4 · 04-27-2004, 07:36 AM

PM sent.

Jim

**FRENCHBLUE72** · 04-27-2004, 08:07 AM

I got one too if jim's fall's through..

JimKshortstep4x4 · 04-27-2004, 09:05 AM

Frenchblue 72,

It will be a couple of weeks for me to get the panel as I am going on vacation, so if you can help him out, please do so.

Jim

billsbowtie · 04-27-2004, 08:50 PM

i have a cab with good parts like that if any one else needs anything thanks bill

capkrk · 04-27-2004, 10:07 PM

Quote:

Originally posted by billsbowtie
i have a cab with good parts like that if any one else needs anything thanks bill

Bill, I need the top of the pass side windshield pillar and part of the roof. I am going to try and attach a picture. If you have this and can cut that corner out for me, please let me know how much to 77489. I don't feel like welding for hours on this one.

thanks

jim
capkrk@yahoo.com
832-435-8058

**FRENCHBLUE72** · 04-27-2004, 10:42 PM

I also have a rusty cab that I am gonna haul off but could cut off some piece's for member's..

*tnchev* · 04-27-2004, 10:58 PM

hey, i am new to the board, so what is a rust free patch panel or a whole floor worth to you? my plaz cutter awaits your answer. tnchev dean your pm box is full

capkrk · 04-28-2004, 12:35 AM

these are the two pieces I need for the floor.

driver side

capkrk · 04-28-2004, 12:35 AM

pass side

**FRENCHBLUE72** · 04-28-2004, 12:42 AM

The floor's are rusty in my cab but I am gonna go up this weekend if anyone need's patch panne's just let me know...

capkrk · 04-28-2004, 12:59 AM

Mine aren't just rusty...they're rotted out Bro.

billsbowtie · 04-28-2004, 10:07 AM

capkrk i sent you a pm

04-26-2004, 11:06 PM	#1
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	WTB cab patch panel I'm looking for a patch panel for the drivers side upper floor board. Needing the area from above the dimmer switch to below the flange including an inch or two of the lower floor pan. Ideally I would like to weld in at the crease outlined in green. If you've got a cab that your willing to cut with this area solid let me know. Thanks.....Stroker __________________ 72 SWB parts and pieces Oklahoma

04-27-2004, 08:07 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	I got one too if jim's fall's through.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-27-2004, 08:50 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have a cab with good parts like that if any one else needs anything thanks bill __________________ i have 67/72 chevy truck parts f/s.

04-27-2004, 10:42 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	I also have a rusty cab that I am gonna haul off but could cut off some piece's for member's.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-27-2004, 10:58 PM	#8
tnchev NON PAYING ADVERTISER Join Date: Mar 2004 Location: Knoxville, TN Posts: 176	patch panel hey, i am new to the board, so what is a rust free patch panel or a whole floor worth to you? my plaz cutter awaits your answer. tnchev dean your pm box is full

04-27-2004, 07:36 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	PM sent. Jim

04-27-2004, 09:05 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Frenchblue 72, It will be a couple of weeks for me to get the panel as I am going on vacation, so if you can help him out, please do so. Jim

04-28-2004, 12:35 AM	#9
capkrk Registered User Join Date: Apr 2004 Location: Missouri City, Texas Posts: 25	these are the two pieces I need for the floor. driver side

04-28-2004, 12:42 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	The floor's are rusty in my cab but I am gonna go up this weekend if anyone need's patch panne's just let me know... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-28-2004, 12:59 AM	#12
capkrk Registered User Join Date: Apr 2004 Location: Missouri City, Texas Posts: 25	Mine aren't just rusty...they're rotted out Bro.

04-28-2004, 10:07 AM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	capkrk i sent you a pm __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.