How about some pics of bagged 60-66 - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mikeextrafast · 11-19-2016, 05:45 PM

Name: image.jpg
Views: 2366
Size: 72.2 KB

LVPhotos · 11-19-2016, 07:09 PM

1962

RAYDAY · 01-02-2017, 03:43 PM

sold now but until last june this was mine!

steveb64 · 01-02-2017, 08:53 PM

Finished up my air valve install.

rocket_customz · 04-25-2017, 04:07 PM

My 66 that im building. First time seeing the cab on the frame

Beatrice · 12-26-2017, 09:04 AM

my 63'. trucks on choppin' block front with my own setup in the rear.she's a garage queen for another 6 months (hopefully)

**Backpayne** · 12-26-2017, 10:36 AM

Quote:

Originally Posted by steveb64

Finished up my air valve install.

How loud are manual valves? I've thought about using them instead of the others.

SkinnyG · 02-10-2018, 01:39 PM

Yes, please - how loud??

**Backpayne** · 02-10-2018, 02:41 PM

Me, too! I've heard that if you run exhaust tubing from manual valves to the exterior it's quiet in the cab.

1968C30 · 02-11-2018, 08:39 PM

My 64 hoping to drive by summer

Jferrante · 02-11-2018, 09:39 PM

Quote:

Originally Posted by 1968C30

My 64 hoping to drive by summer

nice whats the details on it?

1968C30 · 02-12-2018, 06:01 PM

Quote:

Originally Posted by Jferrante

nice whats the details on it?

Manual air ride,400 small block with turbo 400,4 wheel disk brakes.275/55R20 on rear and 245/45R 20 on front. Thanks

60apache · 04-07-2018, 12:03 AM

Quote:

Originally Posted by Miayota

Check Out the Video!

http://www.youtube.com/watch?v=xjDar...hQOeG-NVUFKT3g

what did you do on the rear suspension? got any pics inside of the bed?

Hack_Attack · 04-07-2018, 04:41 PM

Quote:

Originally Posted by SkinnyG

Yes, please - how loud??

Quote:

Originally Posted by Backpayne

How loud are manual valves? I've thought about using them instead of the others.

I've run these little silencers on dump valves before.......so quite, you hardly hear the air when you lower your truck.

Bringit187 · 04-11-2018, 09:58 PM

Are you guys doing drop spindles and cups in the front. What is your ride height. I'd like.to.keep.my ride height close to where it is now with my 5 and 6 static drop

robber grin · 04-12-2018, 07:54 PM

62 Short Fleetside static dropped 5 1/2 x 6 - floor channeled 3" inside the bed box - stock 62 chassis with 78 front clip

Hope to be converting to a basic Air Ride System soon, since I have sufficient pavement samples for my research work...

when taking measurements and looking for hiding places to stuff equipment I found that I have 3" inside the c-notch to the bump-stop, but my rear tire is about 1-2" from inner bed side and will definitely hit when I drop it on bags.

73 K10 12 bolt posi rear is slightly wider than original so I'm guessing I have to trim inner bed panel or change wheel offset.

Anyone else encounter such doings???

Too much talent on this board to ignore

robber grin · 04-13-2018, 09:33 AM

Quote:

Originally Posted by 1968C30

My 64 hoping to drive by summer

did you have to massage the inner bed sides to clear the tires?

What about up front? Inners cut out too?

Nice ride...

forestb · 04-13-2018, 11:29 AM

Miayota is that your green truck? Man I love that thing.

1968C30 · 04-14-2018, 04:56 AM

Quote:

Originally Posted by robber grin

did you have to massage the inner bed sides to clear the tires?

What about up front? Inners cut out too?

Nice ride...

Thanks, I removed the front inner fenders. Had to trim the front fenders also. I also had to trim the bedsides and the fender well lip.

**Android04** · 04-26-2018, 11:37 AM

My 1965 C10 - newly bagged and finally on the road. Paint coming soon...

bpope · 07-31-2018, 12:40 PM

Got mine on the ground, finally. Still haven't done the c notch yet. I will probably tackle that when it cools off some. I have a few things to finish before I drive it.

Slappyracecars · 05-05-2019, 12:05 AM

Few pics of my 66

lowroder · 03-22-2020, 10:21 AM

Quote:

Originally Posted by robber grin

62 Short Fleetside static dropped 5 1/2 x 6 - floor channeled 3" inside the bed box - stock 62 chassis with 78 front clip

Hope to be converting to a basic Air Ride System soon, since I have sufficient pavement samples for my research work...

when taking measurements and looking for hiding places to stuff equipment I found that I have 3" inside the c-notch to the bump-stop, but my rear tire is about 1-2" from inner bed side and will definitely hit when I drop it on bags.

73 K10 12 bolt posi rear is slightly wider than original so I'm guessing I have to trim inner bed panel or change wheel offset.

Anyone else encounter such doings???

Too much talent on this board to ignore

how did the crossmember swap go whats the details..? also what tire size are you using in your photo

lowroder · 03-22-2020, 10:23 AM

im interested in some 62s that has been bagged.. either crossmember swap or on stock suspension doing the torsion bar delete

nhtc33d · 03-23-2020, 04:24 PM

Some pics of my 60 GMC long bed (slowly being turned into Chevy) project.
I removed all the X frame stuff from the 60 chassis, Z'd the front frame,made and installed a step notch and shortened frame and bedsides. It will be getting a 377 sbc and a 4 speed tranny.
The maroon 65 c10 was bought as a parts truck for this project. The frame of the 65 c10 already had a step notched installed as well as a pancaked front crossmember and an aftermarket trailing arm mount when I bought it. I will be selling most of that stuff and several parts from the GMC.

11-19-2016, 05:45 PM	#901
Mikeextrafast Registered User Join Date: Dec 2015 Location: Draper NC Posts: 22	Re: How about some pics of bagged 60-66

11-19-2016, 07:09 PM	#902
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: How about some pics of bagged 60-66 1962 Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-02-2017, 03:43 PM	#903
RAYDAY Registered User Join Date: Feb 2012 Location: Carnegie PA Posts: 130	Re: How about some pics of bagged 60-66 sold now but until last june this was mine! Attached Images __________________ 96 s10 static drop smooth and blue 99 silverado nothing stock layed out on 24s 65 c10 bagged patina driver http://www.myrideisme.com/Garage/az480 half-assed build thread http://67-72chevytrucks.com/vboard/s...=1#post5206828

01-02-2017, 08:53 PM	#904
steveb64 Registered User Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: How about some pics of bagged 60-66 Finished up my air valve install. Attached Images

04-25-2017, 04:07 PM	#905
rocket_customz Registered User Join Date: Apr 2015 Location: Heber city, Utah Posts: 28	Re: How about some pics of bagged 60-66 My 66 that im building. First time seeing the cab on the frame __________________ 1966 Chevrolet 5.3L LM7, cammed, ported and polished 4l60E, manual valve body Throbros front dropmember,Custom 2 link rear with watts link Ridetech control arms, Accuair air management

12-26-2017, 09:04 AM	#906
Beatrice Registered User Join Date: Dec 2017 Location: Ohio Posts: 36	Re: How about some pics of bagged 60-66 my 63'. trucks on choppin' block front with my own setup in the rear.she's a garage queen for another 6 months (hopefully)

02-10-2018, 01:39 PM	#908
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,301	Re: How about some pics of bagged 60-66 Yes, please - how loud?? __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

02-10-2018, 02:41 PM	#909
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 663	Re: How about some pics of bagged 60-66 Me, too! I've heard that if you run exhaust tubing from manual valves to the exterior it's quiet in the cab.

02-11-2018, 08:39 PM	#910
1968C30 Registered User Join Date: Jan 2012 Location: Mt Nebo WV Posts: 1,342	Re: How about some pics of bagged 60-66 My 64 hoping to drive by summer Attached Images

04-11-2018, 09:58 PM	#915
Bringit187 Registered User Join Date: Apr 2018 Location: LEWISTON,MAINE Posts: 7	Re: How about some pics of bagged 60-66 Are you guys doing drop spindles and cups in the front. What is your ride height. I'd like.to.keep.my ride height close to where it is now with my 5 and 6 static drop

04-12-2018, 07:54 PM	#916
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: How about some pics of bagged 60-66 62 Short Fleetside static dropped 5 1/2 x 6 - floor channeled 3" inside the bed box - stock 62 chassis with 78 front clip Hope to be converting to a basic Air Ride System soon, since I have sufficient pavement samples for my research work... when taking measurements and looking for hiding places to stuff equipment I found that I have 3" inside the c-notch to the bump-stop, but my rear tire is about 1-2" from inner bed side and will definitely hit when I drop it on bags. 73 K10 12 bolt posi rear is slightly wider than original so I'm guessing I have to trim inner bed panel or change wheel offset. Anyone else encounter such doings??? Too much talent on this board to ignore Attached Images

04-13-2018, 11:29 AM	#918
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,626	Re: How about some pics of bagged 60-66 Miayota is that your green truck? Man I love that thing.

04-26-2018, 11:37 AM	#920
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 386	Re: How about some pics of bagged 60-66 My 1965 C10 - newly bagged and finally on the road. Paint coming soon... Last edited by Android04; 04-26-2018 at 02:26 PM.

07-31-2018, 12:40 PM	#921
bpope Registered User Join Date: Mar 2018 Location: Springfield, MO Posts: 58	Re: How about some pics of bagged 60-66 Got mine on the ground, finally. Still haven't done the c notch yet. I will probably tackle that when it cools off some. I have a few things to finish before I drive it. Attached Images

05-05-2019, 12:05 AM	#922
Slappyracecars Registered User Join Date: Jul 2018 Location: Poulsbo Posts: 3	Re: How about some pics of bagged 60-66 Few pics of my 66 Attached Images



Register or Log In To remove these advertisements.

03-22-2020, 10:23 AM	#924
lowroder Registered User Join Date: Mar 2012 Location: toledo ohio Posts: 155	Re: How about some pics of bagged 60-66 im interested in some 62s that has been bagged.. either crossmember swap or on stock suspension doing the torsion bar delete

03-23-2020, 04:24 PM	#925
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Re: How about some pics of bagged 60-66 Some pics of my 60 GMC long bed (slowly being turned into Chevy) project. I removed all the X frame stuff from the 60 chassis, Z'd the front frame,made and installed a step notch and shortened frame and bedsides. It will be getting a 377 sbc and a 4 speed tranny. The maroon 65 c10 was bought as a parts truck for this project. The frame of the 65 c10 already had a step notched installed as well as a pancaked front crossmember and an aftermarket trailing arm mount when I bought it. I will be selling most of that stuff and several parts from the GMC. Attached Images __________________ My build link.. http://67-72chevytrucks.com/vboard/s...d.php?t=285353

Register or Log In To remove these advertisements.