Burb Gas Tank?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 04-21-2004, 12:31 AM

Was at the local auto parts store today and a guy walks up to me out in the parking lot looking at my truck. He asks what I did with the gas tank filler and I point out to him where it runs up the inside of the drivers side bed right behind the wheel well. He says on his 72 he used the gas tank from a Suburban that had a filler inlet that allowed him to place the filler neck right behind the license plate with a short length of rubber filler hose straight to the tank inlet??

Has anybody ever heard of a Burb tank that would be the right size,(width), that would allow us to strap it up there between the frame rails behind the rear? And that has the filler inlet facing back towards the license plate?

If this does exist, we could put these guys out of business that sell these 'conversion kits' that leave you wondering how the heck you are gonna' get the gas in the tank!!

Appreciate any info that might be available.

72longbed

68plus4sub · 04-21-2004, 01:00 AM

Suburban filler tubes are on the drivers side of the truck, they don't exit out the back, unless he wasn't talking about a 67-72 era suburban, then I'm not much help.

*72longbed* · 04-21-2004, 11:01 AM

I think it may be a later year.

72

71swb4x4 · 04-21-2004, 12:52 PM

I am pretty sure that 67-72 Suburban tanks sit between the frame rails, not sure where the filler tube is at on the tank.

**Palf70Step** · 04-21-2004, 01:59 PM

Far as I know all Suburbans filled from one side or the other not the rear. Including the newer ones. I would suspect it is an old fullsize station wagon tank, but I can't see how he could have an effective fill behind the plate on a truck. It would be way to low.

71swb4x4 · 04-21-2004, 02:10 PM

I am pretty sure the filler was on the side in the middle, maybe he was able to install the tank sideways, so the filler was at the back.

Shawn

**Classic Heartbeat** · 04-21-2004, 03:07 PM

The only way it would be possible to put a filler behind your licence plate would be if your licence plate was mounted above the height of the bed bottom. What ever tank you want to use the top of the tank has to be lower than the filler neck, or else that gas will flow backwards while trying to fill the tank. (Gravity is bigger than even these trucks...LOL) This is why the Blazers and Suburbans all have fillers about mid height on the rear quarters. WES www.ClassicHeartbeat.com

shortymac83 · 04-21-2004, 03:57 PM

On the 80's fullsize cars, the license plate covered teh filler, but then again, the neck ended about 1/2 way up the tailgate (if you were to use it on a truck). You'd have to either seriously lower the gas tank or seriously raise the filler neck and make it impractical. Something I have heard about is to take a rear-exiting tank like that and to cut the neck off and weld it straight up so the filler is in the bed just in front of the gate.

68plus4sub · 04-22-2004, 02:10 AM

Good Point Wes, hard to make gas flow uphill by itself!!

Brad · 04-23-2004, 03:00 PM

I have a tank from a 73 Sub and had it installed sideways so that the filler tube would end up behind the license plate. I don't know the future of my truck and didn't want to hack anything up only to have to weld up holes in the future, otherwise I would have done it. The fuel tank fits in the frame with no modification, just have to drill holes in the frame to hang it up with.

Basically the filler hose would come out on the panel just below the tailgate and I would have had to barely cut out a semi-circle in the tailgate in order to use a boat filler attachment.

Oh yeah, I still have the tank if anyone wants it. I'd be happy to show you how I would have done it.

67chevy2wd · 04-23-2004, 03:14 PM

Brad,
You should show us how you would have done it. I had thought about doing it that way until i read this post.

*dtlilly* · 04-23-2004, 06:08 PM

I'm going to try to put a 72 Suburban tank under the rear frame rails on my C-30 this weekend. My only worry is where the fill will be located. Stay tuned...pictures to follow next week.

Brad · 04-24-2004, 04:46 AM

Sorry, I can't put the tank up in the space anymore; I have a 72 blazer tank all bolted in right now and just need to attach the fuel filler and lines.

If anyone wants to come get this tank it's free, but you gotta act fast as I'm going to be leaving in 2 weeks for a while.

*bisquik65* · 04-24-2004, 04:25 PM

I used a 72 blazer tank and straps cat a hole in the bed floor (just look at a blazer ) and cut the filler neck in the middle and welded it back together so the filler is right inside the bed.

*dtlilly* · 04-27-2004, 03:10 PM

I'm sorry I didn't get to start this project as I hoped. I'm thinking about just going back to the behind the seat tank to aleviate the problems of where the fill tube needs to be (I don't want to cut up the rare 9 foot long step side bed).

2low72 · 04-27-2004, 03:56 PM

I have a 15 gallon madza truck tank in the back. the bed is raised so the filler neck is hidden by the tail gate

Brad · 04-28-2004, 04:30 AM

That's exactly how I was going to do mine.

Putter · 04-28-2004, 10:50 AM

Hey 2Low72,
How about your gauge? Did you use the Mazda sending unit, or what?

2low72 · 04-28-2004, 01:46 PM

yeah its the madza sending unit. gauge doesn't work properly. If any one knows how to fix it fill me in!!!

04-21-2004, 12:31 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Burb Gas Tank?? Was at the local auto parts store today and a guy walks up to me out in the parking lot looking at my truck. He asks what I did with the gas tank filler and I point out to him where it runs up the inside of the drivers side bed right behind the wheel well. He says on his 72 he used the gas tank from a Suburban that had a filler inlet that allowed him to place the filler neck right behind the license plate with a short length of rubber filler hose straight to the tank inlet?? Has anybody ever heard of a Burb tank that would be the right size,(width), that would allow us to strap it up there between the frame rails behind the rear? And that has the filler inlet facing back towards the license plate? If this does exist, we could put these guys out of business that sell these 'conversion kits' that leave you wondering how the heck you are gonna' get the gas in the tank!! Appreciate any info that might be available. 72longbed

04-21-2004, 01:00 AM	#2
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	Suburban filler tubes are on the drivers side of the truck, they don't exit out the back, unless he wasn't talking about a 67-72 era suburban, then I'm not much help. __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914

04-21-2004, 12:52 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I am pretty sure that 67-72 Suburban tanks sit between the frame rails, not sure where the filler tube is at on the tank. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-21-2004, 01:59 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,762	Far as I know all Suburbans filled from one side or the other not the rear. Including the newer ones. I would suspect it is an old fullsize station wagon tank, but I can't see how he could have an effective fill behind the plate on a truck. It would be way to low. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-21-2004, 02:10 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I am pretty sure the filler was on the side in the middle, maybe he was able to install the tank sideways, so the filler was at the back. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-21-2004, 11:01 AM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	I think it may be a later year. 72

04-21-2004, 03:07 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	The only way it would be possible to put a filler behind your licence plate would be if your licence plate was mounted above the height of the bed bottom. What ever tank you want to use the top of the tank has to be lower than the filler neck, or else that gas will flow backwards while trying to fill the tank. (Gravity is bigger than even these trucks...LOL) This is why the Blazers and Suburbans all have fillers about mid height on the rear quarters. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

04-21-2004, 03:57 PM	#8
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	On the 80's fullsize cars, the license plate covered teh filler, but then again, the neck ended about 1/2 way up the tailgate (if you were to use it on a truck). You'd have to either seriously lower the gas tank or seriously raise the filler neck and make it impractical. Something I have heard about is to take a rear-exiting tank like that and to cut the neck off and weld it straight up so the filler is in the bed just in front of the gate. __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

04-22-2004, 02:10 AM	#9
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	Good Point Wes, hard to make gas flow uphill by itself!! __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914

04-23-2004, 03:00 PM	#10
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	I have a tank from a 73 Sub and had it installed sideways so that the filler tube would end up behind the license plate. I don't know the future of my truck and didn't want to hack anything up only to have to weld up holes in the future, otherwise I would have done it. The fuel tank fits in the frame with no modification, just have to drill holes in the frame to hang it up with. Basically the filler hose would come out on the panel just below the tailgate and I would have had to barely cut out a semi-circle in the tailgate in order to use a boat filler attachment. Oh yeah, I still have the tank if anyone wants it. I'd be happy to show you how I would have done it. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-23-2004, 03:14 PM	#11
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Brad, You should show us how you would have done it. I had thought about doing it that way until i read this post.

04-23-2004, 06:08 PM	#12
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I'm going to try to put a 72 Suburban tank under the rear frame rails on my C-30 this weekend. My only worry is where the fill will be located. Stay tuned...pictures to follow next week.

04-24-2004, 04:46 AM	#13
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Sorry, I can't put the tank up in the space anymore; I have a 72 blazer tank all bolted in right now and just need to attach the fuel filler and lines. If anyone wants to come get this tank it's free, but you gotta act fast as I'm going to be leaving in 2 weeks for a while. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-24-2004, 04:25 PM	#14
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I used a 72 blazer tank and straps cat a hole in the bed floor (just look at a blazer ) and cut the filler neck in the middle and welded it back together so the filler is right inside the bed.

04-27-2004, 03:10 PM	#15
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I'm sorry I didn't get to start this project as I hoped. I'm thinking about just going back to the behind the seat tank to aleviate the problems of where the fill tube needs to be (I don't want to cut up the rare 9 foot long step side bed).



Register or Log In To remove these advertisements.

04-27-2004, 03:56 PM	#16
2low72 Registered User Join Date: Mar 2004 Location: Cheyenne, Wy Posts: 555	here's my set-up I have a 15 gallon madza truck tank in the back. the bed is raised so the filler neck is hidden by the tail gate

04-28-2004, 04:30 AM	#17
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	That's exactly how I was going to do mine. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-28-2004, 10:50 AM	#18
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Hey 2Low72, How about your gauge? Did you use the Mazda sending unit, or what? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-28-2004, 01:46 PM	#19
2low72 Registered User Join Date: Mar 2004 Location: Cheyenne, Wy Posts: 555	yeah its the madza sending unit. gauge doesn't work properly. If any one knows how to fix it fill me in!!! __________________ 2014 GMC Yukon XL (Wifey's) 2004 Chevy Silverado Crew Cab Z71

Register or Log In To remove these advertisements.