The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 07+ Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-25-2018, 02:44 PM   #1
mothertruckr
Registered User
 
mothertruckr's Avatar
 
Join Date: Nov 2012
Location: Pensacola, FL
Posts: 19
Need Help w/ Lift and Tires

So, Im trying to figure out what lift tire combo to go with and before anyone says anything about where the search bar is... I already have been doing a lot of research and still need help.

I have an 07 nnbs GMC Sierra 1500 4wd right now it has 275/60r20 factory 20" rims
Guy I bought it from said it had a 3.5" leveling kit? Looks to be more than that to me. heres some pics:







That block in the rear measures 3 inches and the truck looks level.
The tires it has on it have plenty of room...
the tires i want to get are the bfg KO2's in either the 35x12.5r20 (preferred cause its cheaper) or the 285/65r20... both are a 35 but the 285 is 1 inch narrower

So will the 35's fit?
Do I need bigger lift?
And longevity of everything, if my current set up is shortening the life of my cv axles for example, I would want to switch to something with better geometry.

on a side note the truck will almost always be road driven, Im in college and dont plan to tear up my only vehicle by going mudding, but I have always preferred the ability to go offroad when needed via storms or other scenarios. Where I currently live in florida it floods every spring and I have frequently had to drive through a foot deep, or more, of flooded roads to get out of the city and to higher ground... or like two years ago with my lifted duramax I spent half the day pulling out stuck and stranded vehicles. AND where I might be moving to next year can get a foot or so of snow on the regular. So I definitely want taller than factory height.

Thanks in advance for any help
__________________
07 GMC Sierra NNBS ccsb 4wd 6.0L
98 ram 2500 cummins 2wd 6spd 360rwhp 800ftlbs f/s
1979 C10 383 stroker turbo 400 sold
mothertruckr is offline   Reply With Quote
Old 02-26-2018, 11:21 AM   #2
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: Need Help w/ Lift and Tires

I would say that you should be able to fit the 35s ok as long as you stay with a wheel no wider than 10. post a pic of your truck maybe can tell more what it looks like and what you can as far as running bigger tires
__________________
4x4k30 if trouble was money i would have plenty
4x4k30 is offline   Reply With Quote
Old 02-26-2018, 12:01 PM   #3
mothertruckr
Registered User
 
mothertruckr's Avatar
 
Join Date: Nov 2012
Location: Pensacola, FL
Posts: 19
Re: Need Help w/ Lift and Tires

Quote:
Originally Posted by 4x4k30 View Post
I would say that you should be able to fit the 35s ok as long as you stay with a wheel no wider than 10. post a pic of your truck maybe can tell more what it looks like and what you can as far as running bigger tires


I actually noticed while taking the pictures, the front has the norcal mod in the fender wells, so maybe a previous owner was running 35's already
__________________
07 GMC Sierra NNBS ccsb 4wd 6.0L
98 ram 2500 cummins 2wd 6spd 360rwhp 800ftlbs f/s
1979 C10 383 stroker turbo 400 sold
mothertruckr is offline   Reply With Quote
Old 02-26-2018, 11:50 PM   #4
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: Need Help w/ Lift and Tires

Quote:
Originally Posted by mothertruckr View Post


I actually noticed while taking the pictures, the front has the norcal mod in the fender wells, so maybe a previous owner was running 35's already
yea it looks like there is room with the fender mods I know that you could run 33s for sure. the 35s you will probably need to trim the front air dam some for sure I have 04 2500hd with a 6inch lift with 37/13.50s on 20x12 wheels it works fine with 35s but with the 37s I had to do a lot of trimming on the air dam and front bumper and rear of the front fender had to be trimmed so I know you don't want that with the nice truck you have .I am more into the older trucks so I don't know alot about what will fit and wont just trying to help.
Attached Images
  
__________________
4x4k30 if trouble was money i would have plenty

Last edited by 4x4k30; 02-27-2018 at 12:17 AM.
4x4k30 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com