69 Burb speaker/amp/sub suggestions needed

[Hart_Rod]

Originally Posted by slowcpe

Now I'm a home a/v guy by profession so I don't have to deal with wiring for impedance much. I would personally go with a Dual 4-ohm voice coil (you have selected 2) as I don't see where the amp is 1-ohm stable. biglass may have better input than me.

Also with the box, from the specs of the sub, is a little large (1.25 cu ft.) for the sub (1.0 cu. ft recommended), but should work just fine. Also the cutout diameter of the sub is a little larger than box so you may have to trim it. No big deal, just making you aware.

Now I don't don't know anything about the amp, box, and sub so I'm just going off the specs on that site.

The JL speakers look good!

Originally Posted by BIGglaSS

I just took a look at that box. It is ported. I would use a sealed box or build your own. A ported box needs to be built to the speaker manufacturer's specs, not something generic. A sealed box will give better results for novice install.

This one should be perfect.

https://www.sonicelectronix.com/item...-MDFS1012.html

Placing my order tonight. Will touch bases with both of you tomorrow, .