TX WTB 67-71 Door panel flat washers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CheyenneSuper72 · 02-19-2018, 06:13 PM

Does anyone have any extra of the flat washers that go on the lower door panel mounting screws? I tried to order some but I could not find the right size in the same style. I want to buy a set of 8 nice ones. Let me know what you have. Thanks.

*Jens Jimmy* · 02-19-2018, 08:58 PM

I think I have a drawer with several of them in it. I will look to be sure. If I have them, They are yours. I will put them in a padded envelope, pennies to mail em to a neighbor.
It will be Wednesday before I will be back at the shop, I will let you know.

**davischevy** · 02-19-2018, 09:01 PM

After you get his, find 9 for me. Yes 9.

I need to get over there and pick up something. I won't know it 'till I see it.

*Jens Jimmy* · 02-19-2018, 09:14 PM

I think I can do em Larry, but will have to double the price if I can get the math right... Lets see 0 devided by 2, less instate pick up,.....
cant count that high. I will check wednesday when I get home

**70STOVEBOLT** · 02-19-2018, 09:51 PM

Forgive my ignorance but where do these go? Mine uses tapered screws with no washers

**davischevy** · 02-19-2018, 10:33 PM

The tapered screws had a tapered washer.

It's not unusual for the washers to get left off if the door panel is removed.

CheyenneSuper72 · 02-19-2018, 10:51 PM

Ok thank you. I would be willing to buy them and pay for the postage also. The problem I am having without using the washers is that the screws seem to set too deep inside of the panel. It give an uneven appearance looking across the bottom of the panel. I am using the 67 style pleated panels. It would probably be a non issues on the later ones.

*Jens Jimmy* · 02-27-2018, 07:04 PM

72, They are rolling your way snail mail. No Charge, glad I could help
Larry I think I have enough to take care of yours as well.

CheyenneSuper72 · 02-27-2018, 07:46 PM

Thank you. If I can ever help let me know.

**randy.powell** · 02-28-2018, 02:31 PM

Like Dustin, I am also 8 washers short. Few marbles missing also but that's for another post...

If I may be so kind as to tag on to his post...

Help would be greatly appreciated.

TIA,
Randy

**michael bustamante** · 02-28-2018, 02:53 PM

see? ive been on the site since 2007 anmd I'm still learning stuff. I had no idea there were washers for the screws on the bottom of the metal door interior panals coned or flat. guess I'm missing them too. lol

**Jeff's bowtie's** · 02-28-2018, 03:28 PM

I've seen them on the door panel that are vinyl covered but not on the metal only ones my 68 is all original and has the metal door panels and doesn't have them

**davischevy** · 02-28-2018, 05:47 PM

I could easily be wrong, but I too think the washers were on the vinyl covered door panels, not the metal ones.

**davischevy** · 02-28-2018, 05:51 PM

Quote:

Originally Posted by Jens Jimmy

72, They are rolling your way snail mail. No Charge, glad I could help
Larry I think I have enough to take care of yours as well.

I'll run by and make your day when yo return from your journey.

Safe travels.

**randy.powell** · 03-02-2018, 06:54 AM

I'm still in need of 5 of these if anyone can help a brother out. Bowtie Jeff was able to find me 3 1/2

Thanks!
Randy

CheyenneSuper72 · 03-05-2018, 02:36 PM

Still looking for these. I need 8 nice ones.....here is a picture of what they look like. I am working on getting some from a supplier. They are currently looking at a mid July production date. I will post them up if they come through on them. Thanks!

CheyenneSuper72 · 03-13-2018, 08:09 PM

Bump.

**Grumpy old man** · 03-13-2018, 08:46 PM

try these ,

#10
............................
13/64" ID
.....................
15/32" OD

https://www.macsautoparts.com/early_...SABEgJZO_D_BwE

These guys have everything but their shipping is $7.95 min if your looking for hard to find hardware they should have it and they post part #'s

http://www.autofastco.net/hardware_.html

http://www.clipsandfasteners.com/10-...d-p/a16015.htm

02-19-2018, 08:58 PM	#2
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: WTB 67-71 Door panel flat washers I think I have a drawer with several of them in it. I will look to be sure. If I have them, They are yours. I will put them in a padded envelope, pennies to mail em to a neighbor. It will be Wednesday before I will be back at the shop, I will let you know.

02-19-2018, 09:01 PM	#3
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: WTB 67-71 Door panel flat washers After you get his, find 9 for me. Yes 9. I need to get over there and pick up something. I won't know it 'till I see it. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-19-2018, 09:14 PM	#4
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: WTB 67-71 Door panel flat washers I think I can do em Larry, but will have to double the price if I can get the math right... Lets see 0 devided by 2, less instate pick up,..... cant count that high. I will check wednesday when I get home

02-19-2018, 09:51 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB 67-71 Door panel flat washers Forgive my ignorance but where do these go? Mine uses tapered screws with no washers __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-19-2018, 10:33 PM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: WTB 67-71 Door panel flat washers The tapered screws had a tapered washer. It's not unusual for the washers to get left off if the door panel is removed. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-19-2018, 06:13 PM	#1
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	WTB 67-71 Door panel flat washers Does anyone have any extra of the flat washers that go on the lower door panel mounting screws? I tried to order some but I could not find the right size in the same style. I want to buy a set of 8 nice ones. Let me know what you have. Thanks.

02-19-2018, 10:51 PM	#7
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: WTB 67-71 Door panel flat washers Ok thank you. I would be willing to buy them and pay for the postage also. The problem I am having without using the washers is that the screws seem to set too deep inside of the panel. It give an uneven appearance looking across the bottom of the panel. I am using the 67 style pleated panels. It would probably be a non issues on the later ones.

02-27-2018, 07:04 PM	#8
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: WTB 67-71 Door panel flat washers 72, They are rolling your way snail mail. No Charge, glad I could help Larry I think I have enough to take care of yours as well.

02-27-2018, 07:46 PM	#9
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: WTB 67-71 Door panel flat washers Thank you. If I can ever help let me know.

02-28-2018, 02:31 PM	#10
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: WTB 67-71 Door panel flat washers Like Dustin, I am also 8 washers short. Few marbles missing also but that's for another post... If I may be so kind as to tag on to his post... Help would be greatly appreciated. TIA, Randy

02-28-2018, 02:53 PM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB 67-71 Door panel flat washers see? ive been on the site since 2007 anmd I'm still learning stuff. I had no idea there were washers for the screws on the bottom of the metal door interior panals coned or flat. guess I'm missing them too. lol __________________ 1967custom

02-28-2018, 03:28 PM	#12
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,957	Re: WTB 67-71 Door panel flat washers I've seen them on the door panel that are vinyl covered but not on the metal only ones my 68 is all original and has the metal door panels and doesn't have them

02-28-2018, 05:47 PM	#13
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: WTB 67-71 Door panel flat washers I could easily be wrong, but I too think the washers were on the vinyl covered door panels, not the metal ones. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-02-2018, 06:54 AM	#15
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: WTB 67-71 Door panel flat washers I'm still in need of 5 of these if anyone can help a brother out. Bowtie Jeff was able to find me 3 1/2 Thanks! Randy

03-05-2018, 02:36 PM	#16
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: WTB 67-71 Door panel flat washers Still looking for these. I need 8 nice ones.....here is a picture of what they look like. I am working on getting some from a supplier. They are currently looking at a mid July production date. I will post them up if they come through on them. Thanks! Attached Images



Register or Log In To remove these advertisements.

03-13-2018, 08:09 PM	#17
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: WTB 67-71 Door panel flat washers Bump.

03-13-2018, 08:46 PM	#18
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB 67-71 Door panel flat washers try these , #10 ............................ 13/64" ID ..................... 15/32" OD https://www.macsautoparts.com/early_...SABEgJZO_D_BwE These guys have everything but their shipping is $7.95 min if your looking for hard to find hardware they should have it and they post part #'s http://www.autofastco.net/hardware_.html http://www.clipsandfasteners.com/10-...d-p/a16015.htm Last edited by Grumpy old man; 03-13-2018 at 09:20 PM.

Register or Log In To remove these advertisements.