Poly fuel tank??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**paul blair** · 03-16-2018, 05:19 PM

This tank is made in the USA according to the description...I need a new fuel tank and wondering if any of you have installed one of these...any problems with these POLY TANKS...fit issues...Don't see made in the USA much any more!

Problems · 03-16-2018, 05:26 PM

Quote:

Originally Posted by paul blair

This tank is made in the USA according to the description...I need a new fuel tank and wondering if any of you have installed one of these...any problems with these POLY TANKS...fit issues...Don't see made in the USA much any more!

who is that from and how big is it? New vehicles come with poly tanks I wouldn't be concerned. Actually I am asking who its from because I would be interested in one myself. My truck has an aluminum cell but it's only 13 gallons and doesn't have an internal pump.

Custom 68 · 03-16-2018, 05:31 PM

The one I ran looked very similar and didn't have any issues. I had used mine for several years with an external pump for my efi. I was able to swap to an aluminum tank with the pump internal.
My tank fit fine however it did hang down so it was visible, there was no safety concerns but I didn't like the way it looked.

**paul blair** · 03-16-2018, 05:35 PM

Quote:

Originally Posted by Problems

who is that from and how big is it? New vehicles come with poly tanks I wouldn't be concerned. Actually I am asking who its from because I would be interested in one myself. My truck has an aluminum cell but it's only 13 gallons and doesn't have an internal pump.

GMCPAULS Has Steel and POLY 21 gal

**paul blair** · 03-16-2018, 05:39 PM

Quote:

Originally Posted by Custom 68

The one I ran looked very similar and didn't have any issues. I had used mine for several years with an external pump for my efi. I was able to swap to an aluminum tank with the pump internal.
My tank fit fine however it did hang down so it was visible, there was no safety concerns but I didn't like the way it looked.

Thanks Dave

Rufas · 03-16-2018, 06:21 PM

I just sold the exact tank yesterday. I purchased it from Brothers about 20 years ago. I installed it, but never used it. You will need to modify a sheet metal bed support by cutting about 1/2 out of it so that the tank can sit flush with the frame.

The reason for selling is I went fuel injection and slammed the truck. I was a little concerned the the ground clearance with the poly tank.

BTW - I gave it away for $100

Jrainman · 03-16-2018, 07:42 PM

Quote:

Originally Posted by Problems

who is that from and how big is it? New vehicles come with poly tanks I wouldn't be concerned. Actually I am asking who its from because I would be interested in one myself. My truck has an aluminum cell but it's only 13 gallons and doesn't have an internal pump.

I bet they are made by GTD ( Gas tank depot )they are out of Florida they are plastic gas makers, and all there tanks are made in the USA

**paul blair** · 03-16-2018, 09:06 PM

Thanks RUFAS and JRAINMAN the information

gottattooz · 03-16-2018, 09:57 PM

http://67-72chevytrucks.com/vboard/s...=468341&page=4

Post #80 and 81 has pictures of the mods i did to the bed to make my poly tank sit flush with the frame rails.

-Josh

**paul blair** · 03-17-2018, 05:52 AM

Quote:

Originally Posted by gottattooz

http://67-72chevytrucks.com/vboard/s...=468341&page=4

Post #80 and 81 has pictures of the mods i did to the bed to make my poly tank sit flush with the frame rails.

-Josh

Thank You Josh, This helps a lot...

03-16-2018, 05:19 PM	#1
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 328	Poly fuel tank??? This tank is made in the USA according to the description...I need a new fuel tank and wondering if any of you have installed one of these...any problems with these POLY TANKS...fit issues...Don't see made in the USA much any more! Attached Images

03-16-2018, 05:31 PM	#3
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,930	Re: Poly fuel tank??? The one I ran looked very similar and didn't have any issues. I had used mine for several years with an external pump for my efi. I was able to swap to an aluminum tank with the pump internal. My tank fit fine however it did hang down so it was visible, there was no safety concerns but I didn't like the way it looked. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

03-16-2018, 06:21 PM	#6
Rufas Registered User Join Date: May 2016 Location: Fort Mohave, AZ Posts: 366	Re: Poly fuel tank??? I just sold the exact tank yesterday. I purchased it from Brothers about 20 years ago. I installed it, but never used it. You will need to modify a sheet metal bed support by cutting about 1/2 out of it so that the tank can sit flush with the frame. The reason for selling is I went fuel injection and slammed the truck. I was a little concerned the the ground clearance with the poly tank. BTW - I gave it away for $100 __________________ 1970 GMC 2500 700R Trans RideTech 4 link rear suspension - Air Bagged on all four corners 350 SBC 300hp Weiand Supercharger FiTech EFI

03-16-2018, 09:57 PM	#9
gottattooz Registered User Join Date: Apr 2008 Location: Hampton, Ga Posts: 893	Re: Poly fuel tank??? http://67-72chevytrucks.com/vboard/s...=468341&page=4 Post #80 and 81 has pictures of the mods i did to the bed to make my poly tank sit flush with the frame rails. -Josh __________________ 1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R

03-16-2018, 09:06 PM	#8
paul blair Senior Member Join Date: Jan 2016 Location: massachusetts Posts: 328	Re: Poly fuel tank??? Thanks RUFAS and JRAINMAN the information



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.