1967 c10 gauge cluster connector - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TDH1989 · 03-19-2018, 10:18 AM

Hey guys,
I have my 67 c10 and I'm trying to wire up my instrument panel and I believe the guy that had the truck before me cut the factory rectangle connector that goes to the back of the panel. I've called all around Houston and checked Craigslist for any junkers I could maybe go rob one from but have had no luck. Does any one have a place I can get one from.

Thanks

Richard2112 · 03-19-2018, 10:27 AM

Deutsch Industries makes a good quality connector for that. DT-16 12 pin. Requires a bit to install but I hardwired my cluster using the DT-16 12 pin. Works great.
http://67-72chevytrucks.com/vboard/s...d.php?t=757997

Zeroman · 03-19-2018, 10:55 AM

Outback Truck Parts, Spring, TX.

They are closed on Mondays.

TDH1989 · 03-19-2018, 11:59 AM

You think they would have the factory plug? Or whole new wiring harness. I have never bought a wiring harness but I assume you have to splice your new harness to your old factory plug?

keel056 · 03-19-2018, 11:43 PM

what gauges does your truck have?
Post picture. i may have the connector you need

Zeroman · 03-20-2018, 07:56 AM

Outback Truck Parts has new and used parts. Call them and ask.

TDH1989 · 03-20-2018, 08:13 AM

Quote:

Originally Posted by keel056

what gauges does your truck have?
Post picture. i may have the connector you need

This is the only picture I could find until I get back home. That would be awesome if you had one.

TDH1989 · 03-20-2018, 08:13 AM

Quote:

Originally Posted by Zeroman

Outback Truck Parts has new and used parts. Call them and ask.

Thanks I will call them today

TDH1989 · 03-20-2018, 01:22 PM

Outback had one thanks fellas

03-19-2018, 10:18 AM	#1
TDH1989 Registered User Join Date: Mar 2014 Location: Houston Texas Posts: 68	1967 c10 gauge cluster connector Hey guys, I have my 67 c10 and I'm trying to wire up my instrument panel and I believe the guy that had the truck before me cut the factory rectangle connector that goes to the back of the panel. I've called all around Houston and checked Craigslist for any junkers I could maybe go rob one from but have had no luck. Does any one have a place I can get one from. Thanks Attached Images Last edited by LockDoc; 03-19-2018 at 11:03 AM. Reason: Can't post WTB

03-19-2018, 10:27 AM	#2
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: 1967 c10 gauge cluster connector Deutsch Industries makes a good quality connector for that. DT-16 12 pin. Requires a bit to install but I hardwired my cluster using the DT-16 12 pin. Works great. http://67-72chevytrucks.com/vboard/s...d.php?t=757997

03-19-2018, 10:55 AM	#3
Zeroman Registered User Join Date: Mar 2013 Location: Houston, TX Posts: 348	Re: 1967 c10 gauge cluster connector Outback Truck Parts, Spring, TX. They are closed on Mondays.

03-19-2018, 11:59 AM	#4
TDH1989 Registered User Join Date: Mar 2014 Location: Houston Texas Posts: 68	Re: 1967 c10 gauge cluster connector You think they would have the factory plug? Or whole new wiring harness. I have never bought a wiring harness but I assume you have to splice your new harness to your old factory plug?

03-19-2018, 11:43 PM	#5
keel056 Registered User Join Date: Oct 2017 Location: Houston, Tx Posts: 26	Re: 1967 c10 gauge cluster connector what gauges does your truck have? Post picture. i may have the connector you need

03-20-2018, 07:56 AM	#6
Zeroman Registered User Join Date: Mar 2013 Location: Houston, TX Posts: 348	Re: 1967 c10 gauge cluster connector Outback Truck Parts has new and used parts. Call them and ask.

03-20-2018, 01:22 PM	#9
TDH1989 Registered User Join Date: Mar 2014 Location: Houston Texas Posts: 68	Re: 1967 c10 gauge cluster connector Outback had one thanks fellas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.