CO clock on dash 1965 1966 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yelmer** · 02-10-2018, 09:57 PM

for sale on dash clock good condition i do not know if it works need small screws to attach sold as is 375.00 free shipping in usa

**DPowers** · 02-10-2018, 10:28 PM

Nice

402GMC · 02-13-2018, 11:28 AM

i'll take it if you test and it works

**yelmer** · 02-13-2018, 07:39 PM

it does not work it will need cleaned and checked . i would go 330.00 i also have another one same issue if you want both 550.00

**yelmer** · 02-16-2018, 08:37 PM

now 275.00

Budman56 · 03-30-2018, 11:19 PM

Quote:

Originally Posted by yelmer

now 275.00

Nice

**nsb29** · 03-31-2018, 10:13 AM

Most times you can wash them out with liter fluid and thay will work again the liter fluid will remove old hard oils and leave just enough lube it works 99% of the time if it has the original movment

shortstep60 · 03-31-2018, 11:24 AM

I got a factory clock out of a !962 I found two week ago. I taken the sleeve off of it to check it out very clean. I blew it out and put some very thin oil on it and it work. I would never want to take one a part to many parts in there for me LOL

**nsb29** · 03-31-2018, 01:08 PM

Quote:

Originally Posted by shortstep60

I got a factory clock out of a !962 I found two week ago. I taken the sleeve off of it to check it out very clean. I blew it out and put some very thin oil on it and it work. I would never want to take one a part to many parts in there for me LOL

That is the best thing about the lighter fluid you do not have to take it apart but it leaves just enough oil behind to keep it lubricated I work for a watchmaker back in the mid 60s after school that was an old trick of his most clocks were not worth the time to take them apart for cleaning and lubricating

02-10-2018, 09:57 PM	#1
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	clock on dash 1965 1966 for sale on dash clock good condition i do not know if it works need small screws to attach sold as is 375.00 free shipping in usa Attached Images

02-10-2018, 10:28 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: clock on dash 1965 1966 Nice __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

02-13-2018, 11:28 AM	#3
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 411	Re: clock on dash 1965 1966 i'll take it if you test and it works

02-13-2018, 07:39 PM	#4
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: clock on dash 1965 1966 it does not work it will need cleaned and checked . i would go 330.00 i also have another one same issue if you want both 550.00

02-16-2018, 08:37 PM	#5
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: clock on dash 1965 1966 now 275.00

03-31-2018, 10:13 AM	#7
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: clock on dash 1965 1966 Most times you can wash them out with liter fluid and thay will work again the liter fluid will remove old hard oils and leave just enough lube it works 99% of the time if it has the original movment

03-31-2018, 11:24 AM	#8
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: clock on dash 1965 1966 I got a factory clock out of a !962 I found two week ago. I taken the sleeve off of it to check it out very clean. I blew it out and put some very thin oil on it and it work. I would never want to take one a part to many parts in there for me LOL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.