WI Factory cab lights and wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leisure67 · 04-12-2018, 06:03 PM

One lense was cracked in half and was glued together. The other four are very nice. All grommets look good. Mice got to the wires so some will need to be replaced. Includes the grommet from the kick board and all new stainless screws.

$75 shipped CONUS or reasonable offer.

jaybatta · 04-13-2018, 09:28 AM

Where does it plug into? Fuse block?

Thanks

Joe

leisure67 · 04-13-2018, 11:14 AM

Quote:

Originally Posted by jaybatta

Where does it plug into? Fuse block?

Thanks

Joe

The hot wire plugs into the light switch and the ground was near the steering column.

jaybatta · 04-13-2018, 02:11 PM

On the light switch, was it molded into the wiring harness? Or is this something that can be added to any light switch plug?

leisure67 · 04-13-2018, 02:23 PM

Quote:

Originally Posted by jaybatta

On the light switch, was it molded into the wiring harness? Or is this something that can be added to any light switch plug?

Plugged into an opening in the light switch plug. I will get pictures when I get home.

leisure67 · 04-13-2018, 03:47 PM

The wire pictured went in the open opening at the upper right on the plug.

Someone asked about the numbers on the lenses. They are all the same as the one pictured.

leisure67 · 04-13-2018, 03:54 PM

The writing on the lenses is: SAE GUIDE 81A 69 PI

Nicks33 · 04-13-2018, 05:54 PM

Hello, would you consider a offer of $50.00 for the cab lights? Thanks, Nick

*Harlowhead1972* · 04-13-2018, 06:48 PM

I'll take them for $75. Thanks, Harlow

jaybatta · 04-13-2018, 08:40 PM

Quote:

Originally Posted by leisure67

Plugged into an opening in the light switch plug. I will get pictures when I get home.

That'd be great, thank you!

Joe

jaybatta · 04-13-2018, 08:41 PM

Quote:

Originally Posted by leisure67

The wire pictured went in the open opening at the upper right on the plug.

Someone asked about the numbers on the lenses. They are all the same as the one pictured.

Ahh I see thank you

leisure67 · 04-14-2018, 08:07 AM

Quote:

Originally Posted by Harlowhead1972

I'll take them for $75. Thanks, Harlow

Thanks. PM sent.

*Harlowhead1972* · 04-14-2018, 10:42 AM

Paypal sent. Thanks, Harlow

04-12-2018, 06:03 PM	#1
leisure67 Registered User Join Date: Mar 2017 Location: Black River Falls, WI Posts: 622	Factory cab lights and wiring One lense was cracked in half and was glued together. The other four are very nice. All grommets look good. Mice got to the wires so some will need to be replaced. Includes the grommet from the kick board and all new stainless screws. $75 shipped CONUS or reasonable offer. Attached Images __________________ 1970 K10 1970 C30 1973 C30 1980 K20

04-13-2018, 09:28 AM	#2
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: Factory cab lights and wiring Where does it plug into? Fuse block? Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

04-13-2018, 02:11 PM	#4
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: Factory cab lights and wiring On the light switch, was it molded into the wiring harness? Or is this something that can be added to any light switch plug? __________________ Joe 1968 K20 1970 K20 Semper Fi

04-13-2018, 03:47 PM	#6
leisure67 Registered User Join Date: Mar 2017 Location: Black River Falls, WI Posts: 622	Re: Factory cab lights and wiring The wire pictured went in the open opening at the upper right on the plug. Someone asked about the numbers on the lenses. They are all the same as the one pictured. Attached Images __________________ 1970 K10 1970 C30 1973 C30 1980 K20

04-13-2018, 03:54 PM	#7
leisure67 Registered User Join Date: Mar 2017 Location: Black River Falls, WI Posts: 622	Re: Factory cab lights and wiring The writing on the lenses is: SAE GUIDE 81A 69 PI __________________ 1970 K10 1970 C30 1973 C30 1980 K20

04-13-2018, 05:54 PM	#8
Nicks33 Registered User Join Date: Jan 2018 Location: Mooresville, NC Posts: 71	Re: Factory cab lights and wiring Hello, would you consider a offer of $50.00 for the cab lights? Thanks, Nick

04-13-2018, 06:48 PM	#9
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: Factory cab lights and wiring I'll take them for $75. Thanks, Harlow

04-14-2018, 10:42 AM	#13
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: Factory cab lights and wiring Paypal sent. Thanks, Harlow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.