VA WTB C30 front frame crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brennan · 04-08-2018, 08:59 PM

Looking for a good front frame crossmember from a C30/R30/R3500 frame, this is the one that crosses the framerails right underneath the harmonic balancer that brake valve is bolted to. Mine was destroyed by a tow truck driver, need one to replace it with. This is the one that is riveted to the frame. Let me know if you have one available, shipping will be to Zip 23322. Thanks in advance!

sweetk30 · 04-08-2018, 09:28 PM

Quote:

Originally Posted by Brennan

Looking for a good front frame crossmember from a C30/R30/R3500 frame, this is the one that crosses the framerails right underneath the harmonic balancer that brake valve is bolted to. Mine was destroyed by a tow truck driver, need one to replace it with. This is the one that is riveted to the frame. Let me know if you have one available, shipping will be to Zip 23322. Thanks in advance!

i have a c10 i am parting now . not sure if its the same .

and as a tow truck operator that guy should be shot for not knowing were to hook . . ..

Brennan · 04-08-2018, 09:37 PM

Quote:

Originally Posted by sweetk30

i have a c10 i am parting now . not sure if its the same .

and as a tow truck operator that guy should be shot for not knowing were to hook . . ..

I'm not positive, but i think they are the same. Is yours in good shape? PM me a shipped price!

sweetk30 · 04-08-2018, 10:50 PM

frame is a clean lower pa/md area most its life truck .

i would have to remove it yet to get you a price on shipping .

has a bit of slow release anti-rust shield on it . . . AKA motor oil and dirt

Brennan · 04-09-2018, 09:29 PM

Quote:

Originally Posted by sweetk30

frame is a clean lower pa/md area most its life truck .

i would have to remove it yet to get you a price on shipping .

has a bit of slow release anti-rust shield on it . . . AKA motor oil and dirt

I'm a buyer if you remove it!

sweetk30 · 04-11-2018, 08:44 PM

be sat before i have daylight after work to get it out .

and i have to dig out some other parts for another member .

LILREDGMC · 04-12-2018, 07:12 AM

Do not mean to jump in on your responses....but and I don't know if this is a direct fit. I have a hub to hub with crossmember control arms brakes etc from a mid 80's dually van. Chevy van nose with a square body utility box. It was inside for quite a while but due to space, it has been outside. Light surface rust. I'm out on a job, so no pics for now.

Speeding Dakota · 04-13-2018, 04:55 PM

I have a C20 frame that I could take that cross member out if those don't work for you

Brennan · 04-13-2018, 08:50 PM

Quote:

Originally Posted by sweetk30

be sat before i have daylight after work to get it out .

and i have to dig out some other parts for another member .

Ok, let me know!

Brennan · 04-13-2018, 08:51 PM

Quote:

Originally Posted by Speeding Dakota

I have a C20 frame that I could take that cross member out if those don't work for you

Thanks! Will let you know!

KrazyRay · 04-14-2018, 08:44 AM

I have a very solid one that I just pulled from an 87 R-30. $50 shipped.
Thanks,
Ray

sweetk30 · 04-14-2018, 09:06 AM

that one is cleaner than mine and its a solid one as mine is the cut out style lighter duty .

if me i would prob pic that one my self .

travlinman · 04-14-2018, 02:38 PM

Couple months late on asking. Ive cut up 2 C-30 dually frames and scrapped them. I would've given u 1 for the price of shipping. Sorry

Brennan · 04-14-2018, 08:38 PM

Quote:

Originally Posted by KrazyRay

I have a very solid one that I just pulled from an 87 R-30. $50 shipped.
Thanks,
Ray

Deal! I'll pm you

KrazyRay · 04-16-2018, 01:50 PM

pm returned

Brennan · 04-16-2018, 08:28 PM

Quote:

Originally Posted by KrazyRay

pm returned

Payment sent, thanks Ray!

04-08-2018, 08:59 PM	#1
Brennan Registered User Join Date: Jan 2015 Location: Chesapeake Posts: 91	WTB C30 front frame crossmember Looking for a good front frame crossmember from a C30/R30/R3500 frame, this is the one that crosses the framerails right underneath the harmonic balancer that brake valve is bolted to. Mine was destroyed by a tow truck driver, need one to replace it with. This is the one that is riveted to the frame. Let me know if you have one available, shipping will be to Zip 23322. Thanks in advance!

04-08-2018, 10:50 PM	#4
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB C30 front frame crossmember frame is a clean lower pa/md area most its life truck . i would have to remove it yet to get you a price on shipping . has a bit of slow release anti-rust shield on it . . . AKA motor oil and dirt __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

04-11-2018, 08:44 PM	#6
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB C30 front frame crossmember be sat before i have daylight after work to get it out . and i have to dig out some other parts for another member . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

04-12-2018, 07:12 AM	#7
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: WTB C30 front frame crossmember Do not mean to jump in on your responses....but and I don't know if this is a direct fit. I have a hub to hub with crossmember control arms brakes etc from a mid 80's dually van. Chevy van nose with a square body utility box. It was inside for quite a while but due to space, it has been outside. Light surface rust. I'm out on a job, so no pics for now.

04-13-2018, 04:55 PM	#8
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	Re: WTB C30 front frame crossmember I have a C20 frame that I could take that cross member out if those don't work for you

04-14-2018, 08:44 AM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB C30 front frame crossmember I have a very solid one that I just pulled from an 87 R-30. $50 shipped. Thanks, Ray Attached Images

04-14-2018, 09:06 AM	#12
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB C30 front frame crossmember that one is cleaner than mine and its a solid one as mine is the cut out style lighter duty . if me i would prob pic that one my self . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

04-14-2018, 02:38 PM	#13
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: WTB C30 front frame crossmember Couple months late on asking. Ive cut up 2 C-30 dually frames and scrapped them. I would've given u 1 for the price of shipping. Sorry __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

04-16-2018, 01:50 PM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB C30 front frame crossmember pm returned



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.