Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-21-2018, 09:03 AM | #1 |
Registered User
Join Date: Jul 2013
Location: Deltona, FL
Posts: 235
|
School me on Air Compressor Maintenance
I've been hobby wrenching on cars and trucks on and off for the past 20 years, and I finally got an air compressor. I picked up an old (1963) ~20gal air compressor super cheap. It works great.
What do I need to do for maintenance on this little sucker? I seem to remember people talking about draining them every now and then, and I'm guessing the compressor oil should be changed every now and then. |
04-21-2018, 10:00 AM | #2 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: School me on Air Compressor Maintenance
at work we use 2 80 gallon compressors piped tpogether only running one at a time other acts like a storage tank . we drain them every night i change the oil and air fitlers once a year with syn compressor oil both are about 20-25 years old still pumping along
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
04-21-2018, 10:18 AM | #3 |
Registered User
Join Date: Jul 2015
Location: North East PA
Posts: 684
|
Re: School me on Air Compressor Maintenance
You can go to home depot they sell husky compressor oil , they have conventional oil , semi synthestic and full synthetic oils , you can use any of these oils , you should see a drain plug somewhere at the bottom or side of the compressors crank case , drain oil .there also should be a fill plug located high or top of the crank case , also there might be a sight glass on the side of the case somewhere fill new oill to 3/4 up the sight glass , if no sight glass fill to a little over half way up the crank case and your done , check belt tention also and Maintenance is done
|
Bookmarks |
|
|