Through dash ac setups on Knee Knocker cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

350TacoZilla · 05-01-2018, 12:46 PM

Just gathering ideas at moment and the AC has me stumped on how I want to run it so I thought I would turn to the guys and gals here and see what setups you have done.

My truck is a 63 GMC so I know my dash is bit different than others but would like to see any setups you may have for 60-63 trucks.

I'm really leaning towards going straight through the dash with some sort of round vent similar to my 69 chevelle "astro ventilation" setup but the dash layout makes it basically impossible for a symmetrical install.

62chevy302 · 05-01-2018, 02:51 PM

I would like this too. I hate to have the add-on look of the below dash vents

**nsb29** · 05-01-2018, 06:33 PM

If you install the 64 through 66 Dash Jim and I could fix you up lolMaybe you could use the Side vent that Jim sales

**aerotruk63** · 05-01-2018, 08:52 PM

Go original Cool Pack or Frigidaire setup.

64shortbox · 05-01-2018, 10:31 PM

I also didn't care for the plastic after market look of the under dash vents that came with the Vintage Air system on my truck. I got chrome under dash vents from a 64? Chrysler New Yorker at the local self service wrecking yard. Still under dash vents but real chrome metal and fully adjustable for left & right and tilt up & down.

05-01-2018, 12:46 PM	#1
350TacoZilla Registered User Join Date: Sep 2010 Location: Hancock Md Posts: 421	Through dash ac setups on Knee Knocker cab Just gathering ideas at moment and the AC has me stumped on how I want to run it so I thought I would turn to the guys and gals here and see what setups you have done. My truck is a 63 GMC so I know my dash is bit different than others but would like to see any setups you may have for 60-63 trucks. I'm really leaning towards going straight through the dash with some sort of round vent similar to my 69 chevelle "astro ventilation" setup but the dash layout makes it basically impossible for a symmetrical install.

05-01-2018, 02:51 PM	#2
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Through dash ac setups on Knee Knocker cab I would like this too. I hate to have the add-on look of the below dash vents __________________ -1962 C-10

05-01-2018, 06:33 PM	#3
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Through dash ac setups on Knee Knocker cab If you install the 64 through 66 Dash Jim and I could fix you up lolMaybe you could use the Side vent that Jim sales

05-01-2018, 08:52 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Through dash ac setups on Knee Knocker cab Go original Cool Pack or Frigidaire setup. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-01-2018, 10:31 PM	#5
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: Through dash ac setups on Knee Knocker cab I also didn't care for the plastic after market look of the under dash vents that came with the Vintage Air system on my truck. I got chrome under dash vents from a 64? Chrysler New Yorker at the local self service wrecking yard. Still under dash vents but real chrome metal and fully adjustable for left & right and tilt up & down. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.