1965 C10 - First Old School Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Android04** · 05-10-2018, 08:46 AM

Well the time has come for me to attempt a build thread. I have spent many years in the "import scene" but always had a lot of love for cars in general especially old C10's. This is my second vintage vehicle with my first being a 1963 Impala 4 door that was sold at a mistake of my own as a young boy.

So here we go! Back in August of 2017 my search for a 63-66 C10 finally ended. I picked up a truck that had been sitting in a field in Kentucky for many years for a good price. I had a few stipulations with the purchase which included: swb, 3 on the tree truck, and must have title (haha) So on with the pictures.

Here it is loaded up on the trailer and the interior:

Details:
1965 SWB
283 Motor
3 on the tree
TONS OF RUST

Plans:
Patina look (paint to match the cab)
Replace Rockers
Replace Floor Pans
Fix all of the electrical issues (headlights, taillights, wipers, cluster, heater)
Air Ride
etc. etc. etc.

**Android04** · 05-10-2018, 09:27 AM

Truck made it home safe and sound:

So once home I started with making it safe! I replaced the full suspension including tie rod ends, upper and lower ball joints, shocks, rear springs, trailing arm bushings, wheel bearings, and rebuilt all of the drum brakes. Then it was time to bring the motor alive!

**Android04** · 05-10-2018, 09:35 AM

Up in the air to make it safe

Now time to make it run a little better:
Eldebrock Carb
Eldebrock Intake
New Exhaust
HEI
Fresh fluids and gaskets all around
New Heater core (was full of a rats nest)
Cleaned and painted heater box

Current State of the motor:

More pictures and progress to come

jimmythompson1964 · 05-10-2018, 10:58 AM

Great start ! Is this going to be a daily driver or weekend fun ride

**Android04** · 05-10-2018, 11:00 AM

Quote:

Originally Posted by jimmythompson1964

Great start ! Is this going to be a daily driver or weekend fun ride

Thanks. As of now this is a weekend fun ride and local car shows. I do drive it a couple days a week to work.

jimmythompson1964 · 05-10-2018, 11:36 AM

Quote:

Originally Posted by Android04

Thanks. As of now this is a weekend fun ride and local car shows. I do drive it a couple days a week to work.

That's about how I use mine as well, I drove it to Nashville to work this week these trucks are fun to drive.

jchav62 · 05-10-2018, 12:16 PM

Cool project! Got a lot done. Want to send the old valve covers to me??

In case they're in your way.

Nice work!

**Android04** · 05-10-2018, 01:29 PM

Quote:

Originally Posted by jchav62

Cool project! Got a lot done. Want to send the old valve covers to me??

In case they're in your way.

Nice work!

Thanks. The valve covers are stored away for another future project

Here are a few more pics:
Installing the new rockers and floor pans:

Installed sound deading material, air ride gauge and paddle valves, 8 track player wired into a blue tooth device, fixed the heat

**Android04** · 05-10-2018, 01:33 PM

Better Picture of the gauge and valves:

Also picked up some stock 15x6 wheels and added the baby moons.

**Captainfab** · 05-10-2018, 11:46 PM

Good looking truck

**Android04** · 05-11-2018, 07:36 AM

Thank you Captain Fab, it's come a long way but still has a long way to go!

A few more updates before I head off to the Lake.

Bed was empty so got some plywood, cut it and sealed it. Not bad for $40

CPP Track Bar and shock relocation with 2600 bags:

Cupped my front control arms this past winter; so thankful for the warm weather again:

He has made some amazing progress and the air ride is done and the truck finally made it to it's first car show locally. About a 15min drive both ways but he did great. Oh and his name is Willy. My kid's named him because the first day I got it running I was pulling it into the driveway the front wheel came off. Gotta love kids!

**Android04** · 05-11-2018, 07:43 AM

Now that the air ride is all figured out it's time for some additional fun.

Covert the cluster from dummy lights to full gauges
Finish restoring C60 Grill
Install CPP From Sway Bar
Start the painting and sanding process.

I need to have the truck "done" (lets be honest we are never done) by October for our Wedding Reception for pictures.

After the wedding I plan to spend the money for a front disc conversion, drop spindles, and ditch the cupped lower control arms. Maybe if I can find some decently priced go with some tubular control arms. Lots of money to spend, lots of labor to do, lots of beer to drink, not a lot of time.

**Android04** · 05-16-2018, 01:26 PM

Truck at it's first car show!

Next month we go into paint.

05-10-2018, 08:46 AM	#1
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	1965 C10 - First Old School Build Well the time has come for me to attempt a build thread. I have spent many years in the "import scene" but always had a lot of love for cars in general especially old C10's. This is my second vintage vehicle with my first being a 1963 Impala 4 door that was sold at a mistake of my own as a young boy. So here we go! Back in August of 2017 my search for a 63-66 C10 finally ended. I picked up a truck that had been sitting in a field in Kentucky for many years for a good price. I had a few stipulations with the purchase which included: swb, 3 on the tree truck, and must have title (haha) So on with the pictures. Here it is loaded up on the trailer and the interior: Details: 1965 SWB 283 Motor 3 on the tree TONS OF RUST Plans: Patina look (paint to match the cab) Replace Rockers Replace Floor Pans Fix all of the electrical issues (headlights, taillights, wipers, cluster, heater) Air Ride etc. etc. etc. Last edited by Android04; 05-10-2018 at 02:12 PM.

05-10-2018, 09:27 AM	#2
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Truck made it home safe and sound: So once home I started with making it safe! I replaced the full suspension including tie rod ends, upper and lower ball joints, shocks, rear springs, trailing arm bushings, wheel bearings, and rebuilt all of the drum brakes. Then it was time to bring the motor alive!

05-10-2018, 09:35 AM	#3
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Up in the air to make it safe Now time to make it run a little better: Eldebrock Carb Eldebrock Intake New Exhaust HEI Fresh fluids and gaskets all around New Heater core (was full of a rats nest) Cleaned and painted heater box Current State of the motor: More pictures and progress to come

05-10-2018, 10:58 AM	#4
jimmythompson1964 Registered User Join Date: Jan 2012 Location: Greeneville TN Posts: 251	Re: 1965 C10 - First Old School Build Great start ! Is this going to be a daily driver or weekend fun ride __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=765151

05-10-2018, 12:16 PM	#7
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1965 C10 - First Old School Build Cool project! Got a lot done. Want to send the old valve covers to me?? In case they're in your way. Nice work! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-10-2018, 01:33 PM	#9
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Better Picture of the gauge and valves: Also picked up some stock 15x6 wheels and added the baby moons.

05-10-2018, 11:46 PM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 1965 C10 - First Old School Build Good looking truck __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-11-2018, 07:36 AM	#11
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Thank you Captain Fab, it's come a long way but still has a long way to go! A few more updates before I head off to the Lake. Bed was empty so got some plywood, cut it and sealed it. Not bad for $40 CPP Track Bar and shock relocation with 2600 bags: Cupped my front control arms this past winter; so thankful for the warm weather again: He has made some amazing progress and the air ride is done and the truck finally made it to it's first car show locally. About a 15min drive both ways but he did great. Oh and his name is Willy. My kid's named him because the first day I got it running I was pulling it into the driveway the front wheel came off. Gotta love kids!

05-11-2018, 07:43 AM	#12
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Now that the air ride is all figured out it's time for some additional fun. Covert the cluster from dummy lights to full gauges Finish restoring C60 Grill Install CPP From Sway Bar Start the painting and sanding process. I need to have the truck "done" (lets be honest we are never done) by October for our Wedding Reception for pictures. After the wedding I plan to spend the money for a front disc conversion, drop spindles, and ditch the cupped lower control arms. Maybe if I can find some decently priced go with some tubular control arms. Lots of money to spend, lots of labor to do, lots of beer to drink, not a lot of time.

05-16-2018, 01:26 PM	#13
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 380	Re: 1965 C10 - First Old School Build Truck at it's first car show! Next month we go into paint.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.