Looking for a rear mount tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SKR · 05-17-2018, 11:48 AM

Hey I'm looking for a rear tank, preferably EFI ready, and definitely as bolt-in as possible. I see No Limit makes one, and CPP does too. Does anyone have any experience with either one of those? Is there anyone else I should look at? Thanks.

daddyjeep · 05-17-2018, 12:41 PM

A lot of us use an OEM Blazer or Suburban tank. Although this may not be as fancy as the other options you are looking at, but it gets the job done.

RADustin · 05-17-2018, 01:25 PM

I've had great success with tanks inc.

http://www.tanksinc.com/index.cfm/pa...cat/cat133.htm

**lolife99** · 05-17-2018, 01:34 PM

GSI Machine Fab just started making these for c10’s.

SKR · 05-17-2018, 07:04 PM

Quote:

Originally Posted by daddyjeep

A lot of us use an OEM Blazer or Suburban tank. Although this may not be as fancy as the other options you are looking at, but it gets the job done.

I was under the impression that the Blazer tank took a little engineering to get it to work, but talking to my mechanic today he said he didn't think it would be an issue. So that might be the way I go. It won't be as pretty but the rest of the truck sucks so there's no need for the tank to be a work of art.

Quote:

Originally Posted by RADustin

I've had great success with tanks inc.

http://www.tanksinc.com/index.cfm/pa...cat/cat133.htm

Thanks, I'll have a better look at that tonight.

Quote:

Originally Posted by lolife99

GSI Machine Fab just started making these for c10’s.

I didn't know that, thanks. All their crossmembers and frames and stuff look really nice, so their tanks should be too.

44th Miss Inf · 05-17-2018, 07:20 PM

I’ve got a bad blazer frame I’ll remove the tank crossmembers and mounting hardware from if anyone is interested.

Goats86 · 05-17-2018, 07:21 PM

The drawback to the Blazer tank is no baffles. When mine shows less that 1/4 tank (about 8 gallons) and I corner and throttle hard, it can loose fuel for a second.

44th Miss Inf · 05-17-2018, 08:14 PM

Quote:

Originally Posted by Goats86

The drawback to the Blazer tank is no baffles. When mine shows less that 1/4 tank (about 8 gallons) and I corner and throttle hard, it can loose fuel for a second.

The one out of the 89 Blazer I have with the bad frame was baffled. I’m guessing 87 - up would be as they are FI, but could be wrong.

LOW 7FO · 05-17-2018, 09:52 PM

Quote:

Originally Posted by SKR

Hey I'm looking for a rear tank, preferably EFI ready, and definitely as bolt-in as possible. I see No Limit makes one, and CPP does too. Does anyone have any experience with either one of those? Is there anyone else I should look at? Thanks.

I bought the No Limit tank with an internal pump to simplify my EFI install. It looks to be high quality. Requires you to remove the spare tire holder and rear cross member. The one thing I don't like about it is that the mounting flange is flat for the full length of the tank and the rear frame has a small kick up which makes it look goofy for mounting it. I plan to make some sort of elbow bracket to fill this area up. Won't be visible once bed is back on anyways I'm just being picky. Hopefully I didn't overlook something with it haha. See attached pics.

SKR · 05-17-2018, 10:50 PM

Quote:

Originally Posted by Goats86

The drawback to the Blazer tank is no baffles. When mine shows less that 1/4 tank (about 8 gallons) and I corner and throttle hard, it can loose fuel for a second.

Quote:

Originally Posted by 44th Miss Inf

The one out of the 89 Blazer I have with the bad frame was baffled. I’m guessing 87 - up would be as they are FI, but could be wrong.

I would have thought an 87+ tank would be baffled too, but I've never seen one to know for sure. Either way, Holley's Hydramat would probably be a quick and easy fix for that.

Quote:

Originally Posted by LOW 7FO

I bought the No Limit tank with an internal pump to simplify my EFI install. It looks to be high quality. Requires you to remove the spare tire holder and rear cross member. The one thing I don't like about it is that the mounting flange is flat for the full length of the tank and the rear frame has a small kick up which makes it look goofy for mounting it. I plan to make some sort of elbow bracket to fill this area up. Won't be visible once bed is back on anyways I'm just being picky. Hopefully I didn't overlook something with it haha. See attached pics.

Looks nice. I see what you mean about the flange. That would probably bug me too.

Bloodhound · 05-18-2018, 10:32 AM

I got a poly 31 gallon Blazer tank from here http://www.ineedparts.com/heavy-duty...y-gm-en-2.html

It is baffled.

zach_carver · 05-18-2018, 11:58 AM

Why not Boyds? Ive used a few of them and always had great luck with them.

SKR · 05-18-2018, 12:19 PM

Quote:

Originally Posted by zach_carver

Why not Boyds? Ive used a few of them and always had great luck with them.

Because I got mad and jumped the gun regarding an issue I had, but that has been resolved and I will now be using a Boyd tank.

86c10shorty · 05-19-2018, 03:24 PM

Boyd fuel tanks are pretty sweet, you can always go to EFI for when your ready to go that route Name: gas tank.jpg
Views: 281
Size: 83.7 KB

05-17-2018, 11:48 AM	#1
SKR Registered User Join Date: Mar 2016 Location: Medicine Hat AB Posts: 98	Looking for a rear mount tank Hey I'm looking for a rear tank, preferably EFI ready, and definitely as bolt-in as possible. I see No Limit makes one, and CPP does too. Does anyone have any experience with either one of those? Is there anyone else I should look at? Thanks. __________________ 2007 GMC 2500 CCSB LBZ 1991 GMC 1500 RCSB 350 1981 GMC Street Coupe RCSB 454 Last edited by SKR; 05-18-2018 at 01:10 PM.

05-17-2018, 12:41 PM	#2
daddyjeep Registered User Join Date: Nov 2015 Location: Smethport, PA Posts: 1,213	Re: Looking for a rear mount tank (NOT BOYD WELDING) A lot of us use an OEM Blazer or Suburban tank. Although this may not be as fancy as the other options you are looking at, but it gets the job done. __________________ 85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939 87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html 04 1500 crew cab http://67-72chevytrucks.com/vboard/s...d.php?t=786514

05-17-2018, 01:25 PM	#3
RADustin Registered User Join Date: Jun 2017 Location: New Orleans Posts: 386	Re: Looking for a rear mount tank (NOT BOYD WELDING) I've had great success with tanks inc. http://www.tanksinc.com/index.cfm/pa...cat/cat133.htm __________________ 1949 Chevy 3100 P/U http://67-72chevytrucks.com/vboard/s...d.php?t=302780 1976 GMC Sierra Classic C35 CCSB http://67-72chevytrucks.com/vboard/s...25#post8188825

05-17-2018, 01:34 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Looking for a rear mount tank (NOT BOYD WELDING) GSI Machine Fab just started making these for c10’s. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

05-17-2018, 07:20 PM	#6
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	Re: Looking for a rear mount tank (NOT BOYD WELDING) I’ve got a bad blazer frame I’ll remove the tank crossmembers and mounting hardware from if anyone is interested.

05-17-2018, 07:21 PM	#7
Goats86 Registered User Join Date: Dec 2010 Location: Waxahachie, Texas Posts: 144	Re: Looking for a rear mount tank (NOT BOYD WELDING) The drawback to the Blazer tank is no baffles. When mine shows less that 1/4 tank (about 8 gallons) and I corner and throttle hard, it can loose fuel for a second.

05-18-2018, 10:32 AM	#11
Bloodhound Registered User Join Date: Dec 2011 Location: Massachusetts Posts: 245	Re: Looking for a rear mount tank (NOT BOYD WELDING) I got a poly 31 gallon Blazer tank from here http://www.ineedparts.com/heavy-duty...y-gm-en-2.html It is baffled.

05-18-2018, 11:58 AM	#12
zach_carver Registered User Join Date: Aug 2014 Location: Blue Ridge,GA Posts: 508	Re: Looking for a rear mount tank (NOT BOYD WELDING) Why not Boyds? Ive used a few of them and always had great luck with them. __________________ 1965 C10 LS2/4l70, WHITE, 5/7 DROP LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283 1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E 1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE

05-19-2018, 03:24 PM	#14
86c10shorty Registered User Join Date: Dec 2014 Location: Racine WI Posts: 27	Re: Looking for a rear mount tank (NOT BOYD WELDING) Boyd fuel tanks are pretty sweet, you can always go to EFI for when your ready to go that route



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.