Taillight wiring diagram 65 C10

['65 chevy lover]

Howdy everyone, could someone please point me to a diagram for the taillight wiring for my '65 C10? I'm down to just a few things to do to be done with my truck. I have a new wiring harness from American Autowire and, I have a good idea of how it goes but would like to know for sure before I start so I don't screw it up. I've done search's on the net, but have yet to find what I need. Any help would be greatly appreciated!

[The Rocknrod]

I found this in the FAQ section: http://67-72chevytrucks.com/vboard/s...d.php?t=646002
Wiring diagram for lights: http://67-72chevytrucks.com/vboard/s...d.php?t=629550

[DLW]

This one post #3
http://67-72chevytrucks.com/vboard/s...d.php?t=509085

This one is of the 67-72 wiring but is probably close if not the same to our vintage. My 66' has reverse lights, the 64 diagram does not show them, but the 67-72 does.
Post 1, you can click the links for a high res and save it.
http://67-72chevytrucks.com/vboard/s...d.php?t=662676

['65 chevy lover]

Thanks to ya'll for the replies. I didn't do a good job of Describing what I need. I should have said routing instead of diagram. What I'm needing is the actual routing of the harness, especially where it leaves the cab. A friend of mine said a plug inside the cab, exits thru the firewall, and the wiring harness attaches there and then runs under the cab to the back from there. I thought the wiring went from under the dash and exited thru a hole in the floor on the driver's side toward the back of the cab and then runs to the back.

[DLW]

I think this should help with the firewall connection:


The rest just follows the driver side inner frame rail in the stock wiring harness clips.

['65 chevy lover]

Originally Posted by DLW

I think this should help with the firewall connection:


The rest just follows the driver side inner frame rail in the stock wiring harness clips.

This confirms exactly what my friend said. It also clears up questions I had about some other holes in the firewall. I never should have questioned my friend. He's a pretty smart dude! Thanks for your post.

[The Rocknrod]

Wire routes are shown in the truck assembly manual that are for sale in many places.