|
06-07-2018, 06:52 AM
|
#1 |
|
Registered User
Join Date: Nov 2017
Location: Cincinnati Ohio
Posts: 27
|
Ramhorn manifold
Had a leak on the drivers side manifold. Had it faced off. Needed to take off so much now it hits valve cover. Ground off the risers and still hits. Thinking I might have the same problem if I get a used one and face it off. I see new aftermarket ones on Ebay for $50. Anybody ever had success with these? I've also thought of machining a spacer plate but figure that's twice as many potential leak chances. This is a Vortec engine. Is there less clearance on these? Thanks.
|
|
|
|
06-07-2018, 10:14 AM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,482
|
Re: Ramhorn manifold
If I can't face it in my belt sander it gets replaced. Not worth sending to the machine shop
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
