Door panel hump

[MARTINSR]

Originally Posted by MiraclePieCo

Two ways to avoid the door card hump:

1) Locate some OEM '47 relays (which ran inside the door recess), or

2) Do what I did: use mid-60's relays.
They also run horizontally in the door recess, but require minor modification to install (note the welds where I had to shorten the arm slightly):

RIGHT ON! I need to remember this!

Back when I did my truck in the late seventies I pulled apart the original relay and reassembled it upside down as I remember. I am pretty certain I remember grinding the tabs off so the outer piece would come off and then plug welding it back on, but your way makes more sense.

Brian