Am I missing a bushing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lanman1972 · 06-24-2018, 06:51 PM

Where the automatic trans linkage connects to the steering column, mine is sloppy should there be a bushing at this connection? Thanks guys!

bill3rail · 06-24-2018, 06:56 PM

Not sure about bushings, but look at the rod to see if it is worn the hell out. It is usually fairly obvious when a rod or hole is worn out.

68C15 · 06-24-2018, 08:06 PM

Should be a plastic bushing in there. I'm not sure but I think the same bushing was used up into square body years, maybe even further

**LockDoc** · 06-24-2018, 10:58 PM

-
There are quite a few pieces that go in there. Using the picture at bottom left, starting at the bottom: adjustment bolt/clamp (on the rod), Adjustment bolt cupped washer, metal or plastic sleeve, rubber grommet, shifter arm, washer, lock washer, & nut.

The rubber grommet fits inside the shifter arm and the metal or plastic sleeve fits inside the rubber grommet.

LockDoc

Lanman1972 · 06-25-2018, 10:24 AM

Thank you everyone. Looks like I need to make a bushing.

06-24-2018, 06:51 PM	#1
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Am I missing a bushing Where the automatic trans linkage connects to the steering column, mine is sloppy should there be a bushing at this connection? Thanks guys! __________________ 1972 C10 Custom Deluxe LWB, 402/400, PS, PB, A/C, Highlander, Hugger / White 1971 C10 Cheyenne LWB (SWB), 350/350, PS, PB, A/C, Dark Olive / White.

06-24-2018, 06:56 PM	#2
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: Am I missing a bushing Not sure about bushings, but look at the rod to see if it is worn the hell out. It is usually fairly obvious when a rod or hole is worn out. __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

06-24-2018, 08:06 PM	#3
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Am I missing a bushing Should be a plastic bushing in there. I'm not sure but I think the same bushing was used up into square body years, maybe even further __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

06-24-2018, 10:58 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Am I missing a bushing - There are quite a few pieces that go in there. Using the picture at bottom left, starting at the bottom: adjustment bolt/clamp (on the rod), Adjustment bolt cupped washer, metal or plastic sleeve, rubber grommet, shifter arm, washer, lock washer, & nut. The rubber grommet fits inside the shifter arm and the metal or plastic sleeve fits inside the rubber grommet. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-25-2018, 10:24 AM	#5
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Am I missing a bushing Thank you everyone. Looks like I need to make a bushing. __________________ 1972 C10 Custom Deluxe LWB, 402/400, PS, PB, A/C, Highlander, Hugger / White 1971 C10 Cheyenne LWB (SWB), 350/350, PS, PB, A/C, Dark Olive / White.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.