1969 Burb Bell Housing mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KIC · 07-02-2018, 12:39 PM

So I got the engine back in and was able to change from the 4-on the floor back to the original 3-on the tree. I wasn't there when the engine was pulled and now I am trying to find out if something is missing. The two rubber bell housing mounts appear to be missing possibly a another side of rubber ?

Can anybody tell me what is missing from these mounts?

**MusicMan70** · 07-02-2018, 08:58 PM

KIC; take a look here from Cort60's thread...

http://67-72chevytrucks.com/vboard/s...d.php?t=355921

chevy_mike · 07-03-2018, 10:30 AM

Yes, those are the lower half of the mounts, that will slide into the crossmember. You need the upper half, which are U shaped that ride between the bell housing and the crossmember. Also verify that the bolts are the correct size for the bell housing, as it seems there are two different thread sizes used. Easier to verify while out of the vehicle.

KIC · 07-03-2018, 07:13 PM

Thank you for your responses. MusicMan THANK YOU ! it was right on.NAPA part number 602-1034 I paid $6.49 each.

Thanks to Corts60 for posting it originally.

07-02-2018, 12:39 PM	#1
KIC 1960 GMC Burb Join Date: Jan 2008 Location: Arizona Posts: 385	1969 Burb Bell Housing mounts So I got the engine back in and was able to change from the 4-on the floor back to the original 3-on the tree. I wasn't there when the engine was pulled and now I am trying to find out if something is missing. The two rubber bell housing mounts appear to be missing possibly a another side of rubber ? Can anybody tell me what is missing from these mounts? Attached Images __________________ 1960 GMC Suburban 1/2 ton V-6 2nd generation original owner 60 Burb Build thread: http://67-72chevytrucks.com/vboard/s...=1960+Suburban 60 to 66 Burbs only Thread: http://67-72chevytrucks.com/vboard/s...ighlight=burbs 2003 Tahoe LT

07-02-2018, 08:58 PM	#2
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: 1969 Burb Bell Housing mounts KIC; take a look here from Cort60's thread... http://67-72chevytrucks.com/vboard/s...d.php?t=355921 __________________ MusicMan70 1961 GMC Suburban

07-03-2018, 10:30 AM	#3
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 1969 Burb Bell Housing mounts Yes, those are the lower half of the mounts, that will slide into the crossmember. You need the upper half, which are U shaped that ride between the bell housing and the crossmember. Also verify that the bolts are the correct size for the bell housing, as it seems there are two different thread sizes used. Easier to verify while out of the vehicle. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

07-03-2018, 07:13 PM	#4
KIC 1960 GMC Burb Join Date: Jan 2008 Location: Arizona Posts: 385	Re: 1969 Burb Bell Housing mounts Thank you for your responses. MusicMan THANK YOU ! it was right on.NAPA part number 602-1034 I paid $6.49 each. Thanks to Corts60 for posting it originally. Attached Images __________________ 1960 GMC Suburban 1/2 ton V-6 2nd generation original owner 60 Burb Build thread: http://67-72chevytrucks.com/vboard/s...=1960+Suburban 60 to 66 Burbs only Thread: http://67-72chevytrucks.com/vboard/s...ighlight=burbs 2003 Tahoe LT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.