Anyone know if these are Repopped? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 07-06-2018, 04:14 PM

Looking to find the connecter that fits the AC/Heater blower Resistor. My version has 4 connectors. My original crumbled apart, so before I do everything with individuals I'd like to see if any ony know who sells the pigitail.

I have tried all the normal stuff, LMC,Brothers, Chevy Duty (or whatever they are now), e-bay, amazon., but no luck finding it. Saw many 3-wire ones, but no 4-wire.

Thanks all

Dead Parrot · 07-06-2018, 05:23 PM

If you have pull-a-part type place check there. I just pulled a 4 wire resistor pack and didn't think to clip the connector. Didn't consider there might be different kinds. Just checked my 75 and it is a 4 wire. Not my usual luck. Also picked up a fan relay and fan switch.

**mongocanfly** · 07-06-2018, 05:49 PM

Bill....I've got what you need I think....if this is it I'll send it to you if you want it....it's pretty solid...

**Palf70Step** · 07-06-2018, 07:32 PM

Quote:

Originally Posted by mongocanfly

Bill....I've got what you need I think....if this is it I'll send it to you if you want it....it's pretty solid...

Sent you a PM...Thank You

Pontiac1976 · 07-06-2018, 08:37 PM

Try Gate, Sanded (blue streak), electric connectors.
http://ecatalog.smpcorp.com/STD/#/vehicles
might want call sale teck

*gmachinz* · 07-06-2018, 10:45 PM

If you need a new one with leads I have them.

**hatzie** · 07-07-2018, 06:17 PM

The Delphi Packard part number is 2984570.
It takes Packard 56 female terminals.
Unfortunately, this is one of the shells that are harder to find.
There's a package of five on Evilbay for around $20.

Axle · 07-08-2018, 03:53 PM

I used a ford connector on mine, motorcraft WPT-114, napa ec4. Manual HVAC blower resistor connector for 1987 - 2005 crown vic.
It is not a perfect fit, but I had it (I've got a crown vic) and couldn't locate a specific one for the truck locally and since it was the middle of winter looked around the garage for something when my eye fell on the ford part, and it worked.

Alex.

07-06-2018, 04:14 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Anyone know if these are Repopped? Looking to find the connecter that fits the AC/Heater blower Resistor. My version has 4 connectors. My original crumbled apart, so before I do everything with individuals I'd like to see if any ony know who sells the pigitail. I have tried all the normal stuff, LMC,Brothers, Chevy Duty (or whatever they are now), e-bay, amazon., but no luck finding it. Saw many 3-wire ones, but no 4-wire. Thanks all Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-06-2018, 05:23 PM	#2
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,620	Re: Anyone know if these are Repopped? If you have pull-a-part type place check there. I just pulled a 4 wire resistor pack and didn't think to clip the connector. Didn't consider there might be different kinds. Just checked my 75 and it is a 4 wire. Not my usual luck. Also picked up a fan relay and fan switch.

07-06-2018, 05:49 PM	#3
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,674	Re: Anyone know if these are Repopped? Bill....I've got what you need I think....if this is it I'll send it to you if you want it....it's pretty solid... Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

07-06-2018, 08:37 PM	#5
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 769	Re: Anyone know if these are Repopped? Try Gate, Sanded (blue streak), electric connectors. http://ecatalog.smpcorp.com/STD/#/vehicles might want call sale teck __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

07-06-2018, 10:45 PM	#6
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: Anyone know if these are Repopped? If you need a new one with leads I have them.

07-07-2018, 06:17 PM	#7
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: Anyone know if these are Repopped? The Delphi Packard part number is 2984570. It takes Packard 56 female terminals. Unfortunately, this is one of the shells that are harder to find. There's a package of five on Evilbay for around $20. __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

07-08-2018, 03:53 PM	#8
Axle Registered User Join Date: Jul 2011 Location: SW Ontario Posts: 1,212	Re: Anyone know if these are Repopped? I used a ford connector on mine, motorcraft WPT-114, napa ec4. Manual HVAC blower resistor connector for 1987 - 2005 crown vic. It is not a perfect fit, but I had it (I've got a crown vic) and couldn't locate a specific one for the truck locally and since it was the middle of winter looked around the garage for something when my eye fell on the ford part, and it worked. Alex. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.