Air Intake Support

[NC_John]

Originally Posted by mongocanfly

I made it from aluminum and painted it black....i put a piece of blue tape on it so you can see it better....and of course the pics are upside down

Originally Posted by BR3W CITY

I riveted a little hook on the end of intake pipe and hooked it into my core support (my core has a hole in it for the intake to fit through.

Originally Posted by Bird dog

I made an aluminum support that bolts to the core support and to a small tab I welded to the intake tube. I just picked it up from powder coating today so Ill get it installed and take a pic tomorrow.

Originally Posted by homemade87

My intake is on the passenger side . Picture is a little dark but if you study on it you will see one mount point on the head and another forward of it on the belt tensioner bolt . Both points come to a Y then to the intake . I had a small flat thin piece I hammered into the size of the intake tube and welded a couple tabs to put a bolt in . Doubles as a MAF harness holder . The rods were a couple fender support rods I cut up . Just stuff I had laying around .

Dang. Looks like nearly everybody is having to fabricate something. I'll do some more digging and see what I can figure out. My ability to fab something that I will be HAPPY with is pretty limited. Got some stuff at work I can mess with but it'd probably look more at home on a tractor than on my hot rod....

thanks guys- I really appreciate the input