|
07-12-2018, 12:54 PM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: Dayton, Tennessee
Posts: 447
|
86 c10 drop
LOOKING AT DJM 5/5 DROP KIT WITH SPINDLES, COILS AND FLIP KIT.
MY QUESTION IS CAN I RUN 15 INCH STEEL WHEELS ON FRONT WITH OUT HAVING TO MODIFY THE CONTROL ARMS ? 15x7 STEEL WHEELS WITH 1" THICK ROTORS. 3" DROP ON SPINDLE AND 2" DROP ON SPRING. PICTURES ARE APPRECIATED THANKS IN ADVANCE |
|
|
|
07-12-2018, 01:19 PM
|
#2 |
|
Registered User
Join Date: Nov 2017
Location: spokane, wa
Posts: 122
|
Re: 86 c10 drop
I used 3" dropped spindles on a 77 and 82 c10. I had to grind the lower arms on both of them. I used the factory steel rims, not sure if it was a 6" or 7". Grinding it was easy.
__________________
1977 Chevy C10 SB, Turbo 5.3ls, TH400 |
|
|
|
|
07-14-2018, 01:04 AM
|
#3 |
|
Diggin The SquareLife
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
|
Re: 86 c10 drop
Avoid djm junk only spindle you can run with a stock 15x8 rally is western chassis
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
