67 Ignition Switch and Ash Tray oon 68 - newer dash

[Perpendicular]

I understand the bezel is bigger on the newer dashes, but what piece goes on the switch to hold it on the backside of the dash? Anyone have any pictures? I see I can buy a new bezel but I cannot find anything for the backside :/

Also, what about the ash tray? My 67 dash I am removing does not look the same as the new dash I have now. Do I need to get a complete new setup?

-Paul

[Grumpy old man]

the 67 parts are 1 year only if your using a 68 dash you need 68 parts .

[Perpendicular]

Originally Posted by Grumpy old man

the 67 parts are 1 year only if your using a 68 dash you need 68 parts .

Thanks Grumpy. But what is the piece that goes between the ignition switch and the dash? The switch itself is interchangeable, but the back piece seems to be different and I can't find a reference to it.

-Paul

[Grumpy old man]

Here you go , The lighter is different also

http://www.manestruckparts.com/store...&Category_ID=8


http://www.manestruckparts.com/store...&Category_ID=8

[LockDoc]

-
That is called an ignition switch spacer. If you have a '67 with the small screw on bezel here is the spacer you need.

http://67-72chevytrucks.com/vboard/s...d.php?t=747570

If you have a '68-'72 with the large screw on bezel any parts vendor will have that spacer.

LockDoc