Turn signal switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Patch · 07-22-2018, 07:45 PM

So I discovered my sometimes working turn signals are from loose and/or corroded wires on the original switch assembly on my 69 C/10. I know numerous manufacturers make these switches, but are some better than others? I only want to do this once...😁 Thanks!

Fred T · 07-23-2018, 02:40 AM

Rock Auto shows a Standard Motors switch for $36 and AC Delco for $45. I would put either one in and not give it second thought. Both are made to OE standards.

07-22-2018, 07:45 PM	#1
Patch Senior Member Join Date: Jul 2002 Location: Oak Harbor, WA Posts: 709	Turn signal switch So I discovered my sometimes working turn signals are from loose and/or corroded wires on the original switch assembly on my 69 C/10. I know numerous manufacturers make these switches, but are some better than others? I only want to do this once...😁 Thanks! __________________ Patch

07-23-2018, 02:40 AM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Turn signal switch Rock Auto shows a Standard Motors switch for $36 and AC Delco for $45. I would put either one in and not give it second thought. Both are made to OE standards. __________________ Fred There is no such thing as too much cam...just not enough engine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.