WA Steering column install parts, 5 piece słet with bolts, $34 shipped

[randy500]

I have the under dash bracket for 67-8 trucks which also mounts the e-brake handle if you need that one instead of the flat Style 69-72, it’s shown in the picture with the yellow overspray. That one will not fit in the small flat rate box so add $6 if you want it instead.

[dan s]

Hey Randy, not interested in this part but I know you part lots of trucks. I am looking for the under hood cowl vent actuator and bracket and also the bushing for the inside of the firewall that the flapper shaft rides in. I apologize for asking in this thread, I am having a hard time finding a bushing. Thanks Dan..

[randy500]

Originally Posted by dan s

Hey Randy, not interested in this part but I know you part lots of trucks. I am looking for the under hood cowl vent actuator and bracket and also the bushing for the inside of the firewall that the flapper shaft rides in. I apologize for asking in this thread, I am having a hard time finding a bushing. Thanks Dan..

Hi Dan,
I normally don't sell that plastic bushing and nut because they are not easy to come by. I will take a look and see if I have a spare and look to see what I have for the actuator and bracket.

[dan s]

Okay thanks Randy. If you do have a bushing that you don't want to sell I even had a picture of one I could probably Shadetree engineer one. Let me know about the vacuum actuator and bracket thanks again

[randy500]

Originally Posted by dan s

Okay thanks Randy. If you do have a bushing that you don't want to sell I even had a picture of one I could probably Shadetree engineer one. Let me know about the vacuum actuator and bracket thanks again

Somebody here on the forum did a 3d print of the bushing within the past 6 months to a year, posted a pic of the part and it looked pretty good.

[randy500]

Dan, I think this is everything you asked for. You can have this stuff for $80 shipped. No harm if you don’t want it. I can post more pics of the bushing if you are trying to make one yourself

[dan s]

Hello Randy, thanks for checking into it for me that bushing looks pretty easy to replicate so I'm just going to make one out of a 1/4 20 nylon Bolt drill a hole in the head. I found a similar-looking actuator in my pile of junk so I'll probably just get that to work. Thank you very much for your time I very much appreciate it

[randy500]

Originally Posted by dan s

Hello Randy, thanks for checking into it for me that bushing looks pretty easy to replicate so I'm just going to make one out of a 1/4 20 nylon Bolt drill a hole in the head. I found a similar-looking actuator in my pile of junk so I'll probably just get that to work. Thank you very much for your time I very much appreciate it

Your welcome Dan and I agree it would be easy to replicate with a nylon bolt. The factory put a dab of seam sealer under the bushing when installing it.

[randy500]

Still have a set of column parts...67-8 or 69-72, your choice

[Concordca]

Hi Randy, how much for both sets shipped to 94517?
Thanks

[randy500]

I’m missing one piece to make 2 sets, it’s the piece with the blue tape on it. I will ship it all to you for $70.

[Concordca]

Thanks! Payment sent.

[randy500]

Originally Posted by Concordca

Thanks! Payment sent.

Shipped, tracking is in paypal, USPS. I will drop it of in the morning, thanks.

[Concordca]

Thanks Randy