CA 350 engine & TH350 transmission - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRider · 06-05-2018, 03:14 PM

For sale is a small block Chevy 350 with a turbo 350 transmission combo. Original engine from a 1970 C10, with engine block code V0818TAX (1970 350, a/t, 255 hp). The engine has a performance cam and a brand new Edelbrock performer RPM intake and Demon 650 Cfm carburetor. Heads have hardened seats. It also comes with a billet air cleaner, brand new HEI distributor and plug wires, new fuel pump, new starter and old headers. It's ready to run.

The engine has been cared for and never overheated. I recently replaced the filter on the tranny and internals looked great (no metal shavings, burned fluid, etc). I would recommend an oil pan gasket and rear output shaft seal while it's out though (slight leak from both). Otherwise both units run excellent and are ready to be bolted into a new Chevrolet home. The engine is currently in the truck so serious buyers can hear it startup and purr. $1600 for the whole setup. Feel free to message me with questions, I'm located in the San Diego area.

I also have a newly cleaned gas tank w/ new sending unit and a 4-core radiator that I will be getting rid of in lieu of an LS swap.

jradford · 06-05-2018, 07:32 PM

How many miles on the engine and which heads does it have. Right or left dipstick? I have a 70 350 in my 72 and the dipstick is on the drivers side under the PB unit. PITA to get to. Wonder what shipping would be to Texas?

RedRider · 06-05-2018, 10:36 PM

Quote:

Originally Posted by jradford

How many miles on the engine and which heads does it have. Right or left dipstick? I have a 70 350 in my 72 and the dipstick is on the drivers side under the PB unit. PITA to get to. Wonder what shipping would be to Texas?

About 60k miles since I did rings and bearings only (looked good when I took it apart). Heads are stock 1.94 valves, I did new guides, valve grind and hardened seats. Unfortunately the dipstick is on the drivers side. Let me know if you have any other questions.

Some additional pics:

kiwikid · 06-29-2018, 10:59 PM

burning any oil would you sell engine only ?

RedRider · 07-30-2018, 12:02 AM

Sold, thanks

06-05-2018, 03:14 PM	#1
RedRider Registered User Join Date: Jan 2016 Location: Poway, CA Posts: 356	350 engine & TH350 transmission For sale is a small block Chevy 350 with a turbo 350 transmission combo. Original engine from a 1970 C10, with engine block code V0818TAX (1970 350, a/t, 255 hp). The engine has a performance cam and a brand new Edelbrock performer RPM intake and Demon 650 Cfm carburetor. Heads have hardened seats. It also comes with a billet air cleaner, brand new HEI distributor and plug wires, new fuel pump, new starter and old headers. It's ready to run. The engine has been cared for and never overheated. I recently replaced the filter on the tranny and internals looked great (no metal shavings, burned fluid, etc). I would recommend an oil pan gasket and rear output shaft seal while it's out though (slight leak from both). Otherwise both units run excellent and are ready to be bolted into a new Chevrolet home. The engine is currently in the truck so serious buyers can hear it startup and purr. $1600 for the whole setup. Feel free to message me with questions, I'm located in the San Diego area. I also have a newly cleaned gas tank w/ new sending unit and a 4-core radiator that I will be getting rid of in lieu of an LS swap. __________________ 1970 C-10 "Old Yeller" Last edited by RedRider; 06-05-2018 at 10:39 PM.

06-05-2018, 07:32 PM	#2
jradford Registered User Join Date: Feb 2018 Location: gilmer tx Posts: 75	Re: 350 engine & TH350 transmission How many miles on the engine and which heads does it have. Right or left dipstick? I have a 70 350 in my 72 and the dipstick is on the drivers side under the PB unit. PITA to get to. Wonder what shipping would be to Texas?

06-29-2018, 10:59 PM	#4
kiwikid Registered User Join Date: Oct 2017 Location: los angeles Ca Posts: 84	Re: 350 engine & TH350 transmission burning any oil would you sell engine only ?

07-30-2018, 12:02 AM	#5
RedRider Registered User Join Date: Jan 2016 Location: Poway, CA Posts: 356	Re: 350 engine & TH350 transmission Sold, thanks __________________ 1970 C-10 "Old Yeller"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.