![]() |
|
![]() |
#1 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,439
|
Re: Frankentruck
I had noticed that the bed sides wiggled around a ton when the truck went over bumps. With the steel plate in place, I had not noticed that the wood bed was actually a structural part of the bed. I decided to redo the bed wood myself. My dad and I got some wood, ripped it down with a friend's table saw, routed the groves ourselves, mocked it up, and stained it with a 2 in 1 stain and sealer. I had left what was left of the old wood in the bed so I could still drive the truck until I was ready to actually replace the boards. After removing all the rusty bolts, my ratchet was clogged with some much dust that it stopped working. I had to blow it apart, clean everything, then put it back together.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
Bookmarks |
|
|