Jeep J10

[Scott2]

Originally Posted by 67ChevyRedneck

This is a pretty good article on carb. vehicles and how to help them pass the testing.

https://www.popularmechanics.com/car.../a113/1272536/

Good info - thanks! The PO had some guy doing general fix up and tune up before selling - same guy who put the exhaust system in the bed. I would bet a number of adjustments are off and I know the idle is pretty low. It might be smart to check plugs, wires and distributor and then have a good shop check out the carb, take a few readings and adjust it. It doesn’t run very well overall and with all the re-routing of vacuum and emissions lines I’m sure there are adjustments needed.