Dear LS friends, I need your help. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 07-31-2018, 08:52 AM

Let me know when you want the TechII. I'll be home tonight if you want to swing by.

Low Elco · 07-31-2018, 01:56 PM

right on, I appreciate it.

Low Elco · 08-01-2018, 08:19 AM

So, if anyone's still watching, moderate success! Eric plugged it into his tech 2 scanner last night and found the button to make it "idle learn", and it worked! Still flares a bit, but we expect that to calm down. Drives so great now! Thanks again to Eric, a God among men, for saving my ass yet again.

71cadc10 · 08-02-2018, 09:50 AM

for plugs....relatively cheap NGK TR5 work well.
if you want a step colder plug TR6 is perfect.

BR3W CITY · 08-02-2018, 10:45 AM

The TR5 is a solid all around plug, tho depending where you buy you might get either TR5 OR TR55. (some stores show them as the same part). The plug is the same, but factory gap is different. Just gap your stuff before you run either, and you'll be fine.

07-31-2018, 08:52 AM	#26
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Dear LS friends, I need your help. Let me know when you want the TechII. I'll be home tonight if you want to swing by. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

07-31-2018, 01:56 PM	#27
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Dear LS friends, I need your help. right on, I appreciate it. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-01-2018, 08:19 AM	#28
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Dear LS friends, I need your help. So, if anyone's still watching, moderate success! Eric plugged it into his tech 2 scanner last night and found the button to make it "idle learn", and it worked! Still flares a bit, but we expect that to calm down. Drives so great now! Thanks again to Eric, a God among men, for saving my ass yet again. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-02-2018, 09:50 AM	#29
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Re: Dear LS friends, I need your help. for plugs....relatively cheap NGK TR5 work well. if you want a step colder plug TR6 is perfect. __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

08-02-2018, 10:45 AM	#30
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Dear LS friends, I need your help. The TR5 is a solid all around plug, tho depending where you buy you might get either TR5 OR TR55. (some stores show them as the same part). The plug is the same, but factory gap is different. Just gap your stuff before you run either, and you'll be fine. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.