FS - Bedside patch panels - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 05-06-2004, 01:03 PM

I have this pair of bedsides that were from a Texas bed (long bed). It sat out side for a few years before I got it. The one bedside is pretty nice other than a small spot of rust behind the wheel well. The other is about the same, but has a scrape/dent along part of it. $50/pr (no shipping). If nobody wants them, I can cut patch panels out. Brian

sarge244 · 05-07-2004, 10:23 PM

Can you send me pics of the inside of the bedsides? I'm definately interested.

Thanks. Coming from the Carlisle area.

2birds40 · 05-08-2004, 08:37 PM

do you still have the bedsides if so will they work for a 67 lwb wooden floor and how far away from sayre are you thanks

Burnsman · 05-10-2004, 04:46 PM

I'm located about a half hour south of Erie, Pa. Here is a better shot of the bedsides. The lower lip is rusted on the inside of both. Usable, but would need some work. To sweeten the deal, for a $100, I'd sell the two Texas bedsides, a New Mexico 67 bedside (no rust, but has some dents), a 70 6 lug 3.08 12 bolt rear (single wheel), and a rear sliding window. I'm going through a cleanup phase and need to make some more room. Sarge, you're first in line, so let me know. Thanks. Brian

sarge244 · 05-11-2004, 05:51 PM

Those look about the same as what I have now, so I'll pass. Thanks anyhow.

2birds40 · 05-11-2004, 07:54 PM

i would be intrested in the bedsides only if they will work for my truck 67 wood floor i can be down there this saturday if that is okay with you you can email me your address at payangra@aol.com

05-06-2004, 01:03 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	FS - Bedside patch panels - Pa I have this pair of bedsides that were from a Texas bed (long bed). It sat out side for a few years before I got it. The one bedside is pretty nice other than a small spot of rust behind the wheel well. The other is about the same, but has a scrape/dent along part of it. $50/pr (no shipping). If nobody wants them, I can cut patch panels out. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-10-2004, 04:46 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Bedsides I'm located about a half hour south of Erie, Pa. Here is a better shot of the bedsides. The lower lip is rusted on the inside of both. Usable, but would need some work. To sweeten the deal, for a $100, I'd sell the two Texas bedsides, a New Mexico 67 bedside (no rust, but has some dents), a 70 6 lug 3.08 12 bolt rear (single wheel), and a rear sliding window. I'm going through a cleanup phase and need to make some more room. Sarge, you're first in line, so let me know. Thanks. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-11-2004, 07:54 PM	#6
2birds40 Registered User Join Date: Apr 2004 Location: new york Posts: 26	i would be intrested in the bedsides only if they will work for my truck 67 wood floor i can be down there this saturday if that is okay with you you can email me your address at payangra@aol.com Last edited by 2birds40; 05-11-2004 at 08:48 PM.

05-07-2004, 10:23 PM	#2
sarge244 Registered User Join Date: Dec 2003 Location: Shippensburg, PA Posts: 3	Can you send me pics of the inside of the bedsides? I'm definately interested. Thanks. Coming from the Carlisle area.

05-08-2004, 08:37 PM	#3
2birds40 Registered User Join Date: Apr 2004 Location: new york Posts: 26	do you still have the bedsides if so will they work for a 67 lwb wooden floor and how far away from sayre are you thanks

05-11-2004, 05:51 PM	#5
sarge244 Registered User Join Date: Dec 2003 Location: Shippensburg, PA Posts: 3	Those look about the same as what I have now, so I'll pass. Thanks anyhow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.