Project SHKNBK

[LockDoc]

Originally Posted by Bramante

I've also recently completely rebuilt the transfer case. Can't kill the old NP205. I milled a flat, drilled and tapped the hole for the VSS sensor with the 40 pulse tone wheel so that the 4L80E trans will function properly. I had to replace the stock input shaft with a female 32 spline (If I remember the count correctly) shaft. All new bearings, seals and a REAL GOOD deep clean. That's one good looking transfer case if I say so myself!

Here are some before and after pictures:

Looks good! You put a lot of time and work into that....

LockDoc