fuse panel question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crewcabshorty · 08-21-2018, 09:35 PM

I am working on a 1982 k30 and need to use a accesory switched 12volt plug on the fuse panel. did Gm make plugs that just plugged into the panel ? I tried to use a male spade just pushed into the socket, not happy with it. Thanks

Pontiac1976 · 08-21-2018, 10:40 PM

Yes there should be at least one accy you can put a male spade.( that one is not Fused you have put in line fuse) What ever accy that close to it what ever fuse is in the that one is what the wire is rated at (witch I think is 15 or 10 so if it more your going to have use some thing eles.
but have to look at your fuse box. Make sure if it is . There might be a few fuse option not in use that you can make your connection to. Test light time. If your fuse box had A/c you might have a few. you can get jumper fuse contacts.

**Jeff's bowtie's** · 08-22-2018, 10:54 AM

Quote:

Originally Posted by crewcabshorty

I am working on a 1982 k30 and need to use a accesory switched 12volt plug on the fuse panel. did Gm make plugs that just plugged into the panel ? I tried to use a male spade just pushed into the socket, not happy with it. Thanks

Yes they had accessory plugs that plugged into the fuse block with clips on them to lock them onto the block

crewcabshorty · 08-22-2018, 08:22 PM

Thanks for the help guys ! Jeff would you happen to have any of those plugs available?

**Jeff's bowtie's** · 08-22-2018, 09:13 PM

I should have a few I'll look on Saturday and let you know as I just picked up 2 k/30 crew cabs

LeesTruk · 08-23-2018, 04:43 AM

Go to www.repairconnector.com, and look at fuse taps and links on their menu. You'll find the tap and pigtail that you need for your fuse block

**hatzie** · 08-23-2018, 03:26 PM

The 79 and later fuse panels used several different Pak Con connectors depending on what slot you wanted to use.

The slots were hot under different conditions. BAT, IGN, ACC-only, IGN/ACC, ... Get the GM wiring manual for your year. The connector part numbers and the function of each group of power taps are in the wiring manuals.

kazoocruiser · 08-24-2018, 01:23 AM

Quote:

Originally Posted by crewcabshorty

I am working on a 1982 k30 and need to use a accesory switched 12volt plug on the fuse panel. did Gm make plugs that just plugged into the panel ? I tried to use a male spade just pushed into the socket, not happy with it. Thanks

The plugs are availble. The GM part number should be 12004892.

https://www.connectorpeople.com/Conn...ARD/1/12004892

I'm going to need 2 myself to wire in a headlights on buzzer.

**hatzie** · 08-25-2018, 01:25 AM

Quote:

Originally Posted by kazoocruiser

The plugs are availble. The GM part number should be 12004892.

https://www.connectorpeople.com/Conn...ARD/1/12004892

I'm going to need 2 myself to wire in a headlights on buzzer.

There's a thread on installing the stock T63 headlamp/key/seatbelt warning buzzer.

http://67-72chevytrucks.com/vboard/s...d.php?t=729153

**Jeff's bowtie's** · 08-25-2018, 11:27 PM

I looked and came up empty handed sorry

08-21-2018, 09:35 PM	#1
crewcabshorty Registered User Join Date: Jan 2012 Location: greenville pa 16125 Posts: 283	fuse panel question I am working on a 1982 k30 and need to use a accesory switched 12volt plug on the fuse panel. did Gm make plugs that just plugged into the panel ? I tried to use a male spade just pushed into the socket, not happy with it. Thanks

08-21-2018, 10:40 PM	#2
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 780	Re: fuse panel question Yes there should be at least one accy you can put a male spade.( that one is not Fused you have put in line fuse) What ever accy that close to it what ever fuse is in the that one is what the wire is rated at (witch I think is 15 or 10 so if it more your going to have use some thing eles. but have to look at your fuse box. Make sure if it is . There might be a few fuse option not in use that you can make your connection to. Test light time. If your fuse box had A/c you might have a few. you can get jumper fuse contacts. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. Last edited by Pontiac1976; 08-22-2018 at 11:02 PM.

08-22-2018, 08:22 PM	#4
crewcabshorty Registered User Join Date: Jan 2012 Location: greenville pa 16125 Posts: 283	Re: fuse panel question Thanks for the help guys ! Jeff would you happen to have any of those plugs available?

08-22-2018, 09:13 PM	#5
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: fuse panel question I should have a few I'll look on Saturday and let you know as I just picked up 2 k/30 crew cabs

08-23-2018, 04:43 AM	#6
LeesTruk Registered User Join Date: Mar 2015 Location: Manchester, CT Posts: 433	Re: fuse panel question Go to www.repairconnector.com, and look at fuse taps and links on their menu. You'll find the tap and pigtail that you need for your fuse block

08-23-2018, 03:26 PM	#7
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 5,020	Re: fuse panel question The 79 and later fuse panels used several different Pak Con connectors depending on what slot you wanted to use. The slots were hot under different conditions. BAT, IGN, ACC-only, IGN/ACC, ... Get the GM wiring manual for your year. The connector part numbers and the function of each group of power taps are in the wiring manuals. __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

08-25-2018, 11:27 PM	#10
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: fuse panel question I looked and came up empty handed sorry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.